WenmarOpen by Wenmar Pro

Service bulletins for the 2010 Audi A8

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

652 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
001349203357612022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
011467202844532022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). Optimized software in the engine control module.
0113992027732112022-09-26. Service bulletin. FUEL SYSTEM, GASOLINE:STORAGE:EVAPORATIVE EMISSIONS:CANISTER; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). 01 MIL on, no leak in EVAP system (DTC P045600 in ECM. Software update needed.
001463203357622022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
001459202973722022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
001349203357612022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
13352010043132022-08-01. Service bulletin. ENGINE AND ENGINE COOLING. Engine oils that meet Audi Oil Quality Standards.
1453203901812022-08-01. Service bulletin. ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. A small amount of dry or crusted coolant is seen on the coolant pump housing (Figure 1, Figure 2, and Figure 3). The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.
1453203812922022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
1450203812912022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
1491202884222022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM). Customer vehicle is fitted with unauthorized ECM tuning.
37 14 31 20130022022-05-02. Service bulletin. POWER TRAIN; ENGINE AND ENGINE COOLING; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:SEALS/GASKETS. As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak. Automatic transmission fluid is leaking at the sump pan gasket.
A1722172060750_32022-04-05. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin contains instructions for using the UV additive to find engine oil leaks.
A1922282025303132022-02-04. Service bulletin. ENGINE AND ENGINE COOLING; EQUIPMENT. This bulletin contains instructions for identifying and mixing factory fill coolants.
A1922272025303122022-02-04. Service bulletin. ENGINE AND ENGINE COOLING:COOLING SYSTEM; EQUIPMENT. This bulletin contains instructions for identifying and mixing factory fill coolants.
0113432028445 22021-12-13. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM):SOFTWARE. New software in engine control module addressed the condition.
A1021222018288_92021-06-03. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
A1721122060750_22021-03-04. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin contains instructions for using the UV additive to find engine oil leaks.
A1720112060750_12020-11-05. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION; EQUIPMENT. This bulletin contains instructions for using the UV additive to find engine oil leaks.
A9020652032113_42020-09-03. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING:COOLING SYSTEM. This information bulletin contains a background on the outside air temperature reading.
A1920042025303_12020-07-07. Service bulletin. ENGINE AND ENGINE COOLING. This bulletin contains instructions for identifying and mixing factory fill coolants.
A0020372059437_12020-06-04. Service bulletin. ENGINE; FUEL SYSTEM, GASOLINE:DELIVERY. The informational bulletin explains why during COVID-19 there is winter-blend fuel during a warmer season and causing some issues.
A871679 2041717-2018-03-13. Service bulletin. ENGINE; ENGINE AND ENGINE COOLING; EQUIPMENT:APPLIANCE:AIR CONDITIONER. This bulletin applies to any repair that requires replacement of the air conditioning compressor and details how to run a ODIS GFF test plan.
A1915612025303-52018-02-05. Service bulletin. ENGINE AND ENGINE COOLING. Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
A0115312033806-72018-02-05. Service bulletin. ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING. Supersedes Technical Service Bulletin Group 80 number 14-07 dated August 11, 2014. The MIL is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults may be stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss as a result of coolant migration in the electrical harness, faults in 08-Heating and Air Conditioning Electronics that result from coolant migration in the electrical harness, or a faulty N82 control valve.

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.