WenmarOpen by Wenmar Pro

Service bulletins for the 2013 Audi A6

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

1666 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

By topic

Only bulletins with component: Glass, wipers and mirrors are shown. Show all

Bulletins, newest first
A9219232038151_12019-12-07. Service bulletin. VISIBILITY; VISIBILITY:WINDSHIELD WIPER/WASHER. This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct. 2015-2021 A3 Cabriolet, 2016-2018 A3 Sportback, 2018-2021 A5 Sportback, 2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 RS 6 Avant
A921916 20381512019-04-01. Service bulletin. EQUIPMENT; VISIBILITY:REAR WINDOW WIPER/WASHER. This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A641436 2020552-2017-12-05. Service bulletin. VISIBILITY:WINDSHIELD. Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
A921409 2038151-2017-12-05. Service bulletin. VISIBILITY:WINDSHIELD. Supersedes Technical Service Bulletin Group 92 number 14-08 dated August 19, 2014. The washer solvent level warning is on in the DIS, but the washer solvent level is correct. There is no functional restriction in the windshield washer system. The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank. The operation of the level sensor relies on the composition of the solvent to provide an accurate message on the solvent level. Incorrect concentration and the presence of additives can contaminate the sensor and reduce its sensitivity.
A641329 2020552-2017-12-05. Service bulletin. VISIBILITY:WINDSHIELD. Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
Dealer Letter -2017-12-05. Service bulletin. VISIBILITY; EQUIPMENT. This communication is to inform you of upcoming Update 68E3. On certain Audi A6 and A8 vehicles equipped with an electric sun blind for the rear window (3Y2, 3Y5, 3Y8), the blind may stop functioning if it is fully extended several times in quick succession. Update software for the comfort system central control module.
Update Bulletin2017-12-05. Service bulletin. EQUIPMENT; VISIBILITY. On Audi A6 and A8 vehicles equipped with an electric sun blind for the rear window (3Y2, 3Y5, 3Y8), the blind may stop functioning if it is fully extended several times in quick succession. This Update is in effect until removed. Procedure is valid only for vehicles that show the 68E3 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the New Vehicle Limited Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale. On Audi A6 and A8 vehicles equipped with an electric sun blind for the rear window (3Y2, 3Y5, 3Y8), the blind may stop functioning if it is fully extended several times in quick succession.
A871233 2029136-2017-11-08. Service bulletin. VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM; EQUIPMENT. Supersedes Technical Service Bulletin Group 87 number 12-26 dated March 28, 2012. The customer may report that after selecting a specific temperature in AUTO mode, the resulting airflow and temperature are uncomfortable. The customer complaint is subjective and may be difficult to diagnose during a road test. Please test drive with the customer before as well as after this repair to ensure a thorough understanding of the customer? s concern. At certain outside temperatures and operating conditions, the temperature in the passenger compartment fluctuates. This is caused by the unventilated sensor in the air conditioning control panel. There may also be DTCs stored for mechanical malfunction of one or more air distribution control motors in (08) air conditioning/heating control unit.
A871235 2029136-2017-11-08. Service bulletin. EQUIPMENT; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM. Supersedes Technical Service Bulletin Group 87 number 12-33 dated November 7, 2012. The customer may report that after selecting a specific temperature in AUTO mode, the resulting airflow and temperature are uncomfortable. The customer complaint is subjective and may be difficult to diagnose during a road test. Please test drive with the customer before as well as after this repair to ensure a thorough understanding of the customer? s concern. At certain outside temperatures and operating conditions, the temperature in the passenger compartment fluctuates. This is caused by the unventilated sensor in the air conditioning control panel. There may also be DTCs stored for mechanical malfunction of one or more air distribution control motors in (08) air conditioning/heating control unit.
Fluid Capacity C2017-11-08. Service bulletin. EQUIPMENT; POWER TRAIN; STEERING; ENGINE AND ENGINE COOLING; ENGINE; VISIBILITY:WINDSHIELD; SERVICE BRAKES; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This document contains the fluid capacity chart.
A661554 2025323-2017-10-27. Service bulletin. VISIBILITY. Supersedes Technical Service Bulletin Group 66 number 12-20 dated April 9, 2012. A loud noise is heard when the outside mirrors are folded in or out. The noise originates in the metal spring inside the hinge area of the mirror housing. This spring is used for stabilizing the mirror when the vehicle is driven over rough roads to minimize mirror glass shake. When the mirror housing is folded in or out, the spring must turn or twist with the movement of the housing. The bottom and the top of the spring sit on a plastic base and due to increased friction at these contact points, the spring will skip along the plastic base during the folding operation and creates the noise. The normal functionality of the mirror is not affected.
A921510 2038151-2017-10-21. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. Supersedes Technical Service Bulletin Group 92 number 14-09 dated September 12, 2014. The washer solvent level warning is on in the DIS, but the washer solvent level is correct. There is no functional restriction in the windshield washer system. The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank. The operation of the level sensor relies on the composition of the solvent to provide an accurate message on the solvent level. Incorrect concentration and the presence of additives can contaminate the sensor and reduce its sensitivity.
A921614 2038151-2017-09-27. Service bulletin. VISIBILITY:WINDSHIELD WIPER/WASHER. This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
TSB-96-12-342012-06-18. Service bulletin. EQUIPMENT:ELECTRICAL; VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR; VISIBILITY:REARVIEW MIRRORS/DEVICES. AUDI: WHEN SELECTING REVERSE GEAR, THE PICTURE OF REARVIEW CAMERA FAILS TO APPEAR, SPORADICALLY. CERTAIN MODELS, CAMERA IMAGE CAN BE RE=ACTIVATED. MODEL YEARS 2008-2013. *PE

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.