# P2440 on the 2012 Audi A6

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

Nobody has written a description of this code yet.

## Bulletins for this model year that name P2440

- [10250439](https://open.wenmarpro.com/bulletins/10250439), 2024-02-20: MIL on, DTC P112800 and/or P113000 or P008700 or P244000 and/or P244200 in ECM
- [10133222](https://open.wenmarpro.com/bulletins/10133222), 2018-04-16: This technical service bulletin instructs the reader to replace either a combi valve or vacuum solenoid valve depending on the circumstances under which DTC P244000 and/or P244200 were stored.
- [10130175](https://open.wenmarpro.com/bulletins/10130175), 2018-03-13: This technical service bulletin instructs the reader to replace either a combi valve or vacuum solenoid valve depending on the circumstances under which DTC P244000 and/or P244200 were stored.
- [10122797](https://open.wenmarpro.com/bulletins/10122797), 2017-11-08: Supersedes Technical Service Bulletin Group 24 number 12 ? 35 dated August 1, 2012. MIL on with one or more DTCs. DTC P112800 and/or P113000 or P008700 or P244000 and/or P244200 in ECM.
- [10122173](https://open.wenmarpro.com/bulletins/10122173), 2017-11-08: Supersedes Technical Service Bulletin Group 01 number 13\-07 dated June 21, 2013. The MIL is on. DTCs are stored in the engine control module \(ECM\). The faults listed above are caused by an incorrect software setting and can occur under certain driving conditions. In some scenarios, such as extended idling or heavy stop\-and\-go traffic, a slight misinterpretation of the data can occur and the MIL may be activated. The MIL will illuminate and DTC P112800 and/or DTC P113000 will be stored when the intake air temperature is high. Freeze frame data will show an intake air temperature above 104°F \(40°C\). The MIL will illuminate and DTC P008700 will be stored when the coolant temperature is high. Freeze frame data will show a coolant temperature above 212°F \(100°C\). There are no condition restrictions for DTC P244000 or DTC P244200.
- [10119983](https://open.wenmarpro.com/bulletins/10119983), 2017-10-21: The MIL is on. DTCs P2440\(00\) and/or P2442\(00\) are stored in the ECM. One of the combi valves is defective or the vacuum solenoid is defective.
- [10095588](https://open.wenmarpro.com/bulletins/10095588), 2017-03-17: THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO REPLACE EITHER A COMBI VALVE OR VACUUM SOLENOID VALVE DEPENDING ON THE CIRCUMSTANCES UNDER WHICH DTC P244000 AND/OR P244200 WERE STORED.
- [10094881](https://open.wenmarpro.com/bulletins/10094881), 2017-03-14: THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO REPLACE EITHER A COMBI VALVE OR VACUUM SOLENOID VALVE DEPENDING ON THE CIRCUMSTANCES UNDER WHICH DTC P244000 AND/OR P244200 WERE STORED.
- [10093211](https://open.wenmarpro.com/bulletins/10093211), 2017-02-28: THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO REPLACE EITHER A COMBI VALVE OR VACUUM SOLENOID VALVE DEPENDING ON THE CIRCUMSTANCES UNDER WHICH DTC P244000 AND/OR P244200 WERE STORED.
- [10092641](https://open.wenmarpro.com/bulletins/10092641), 2017-02-23: THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO REPLACE EITHER A COMBI VALVE OR VACUUM SOLENOID VALVE DEPENDING ON THE CIRCUMSTANCES UNDER WHICH DTC P244000 AND/OR P244200 WERE STORED.