Service bulletins for the 2010 Audi A6
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
818 on file from NHTSA, as of 2026-10-19.
By type
By component
By trouble code
Only bulletins with component: Air bags are shown. Show all
| A461486 2022584- | 2018-02-05. Service bulletin. SUSPENSION; AIR BAGS; SERVICE BRAKES, HYDRAULIC. Brake-related vibration and pulsation has several causes that depend on driving style and resulting brake disc temperature, as well as environmental conditions. Both the intensity of the wear of the brake system and the type of wear depend on the operating conditions of the vehicle. The wear of the brake discs is determined by the frequency and intensity of the brake operations. Dirt build-up, exposure to sand, long standing times, and road salt or similar, can also promote wear as well as cause scoring marks on the brake discs. The driving style of the driver also influences the wear of the brake system. An overly-aggressive driving style, which results in frequent sharp braking, can lead to more wear (particularly of the brake pads). A gentle driving style can result in very light brake applications. If the brakes are always applied with little pressure, a rust film and other airborne particles may settle on the brake discs and pads. Firm brake operations can help clean off such build-up from the brakes. |
|---|---|
| 69N1 69N2 and 69 | 2018-02-05. Service bulletin. AIR BAGS. This communication informs the dealers of details on the Takata parts allocation. |
| A691428 2023323- | 2017-11-08. Service bulletin. AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE; AIR BAGS. Supersedes Technical Service Bulletin Group 69 number 13-26 dated October 21, 2013. After the airbag control module (J234) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model's SVM code is provided in a parts bulletin (GP bulletin), which should have been referenced through ETKA when the module was replaced. The control module cannot be coded until the SVM code has been executed. If the SVM code was not acquired through the GP bulletin in ETKA, follow the instructions in the Service section of this bulletin to update the control module. |
| TAKATA | 2017-10-25. Service bulletin. AIR BAGS. Takata Recall Campaign - Communication Toolkit for Dealers |
| TSB-69-11-20 | 2012-03-26. Service bulletin. AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE; AIR BAGS. AUDI: SOME MODEL YEAR VEHICLES MUST HAVE THE SERVICE PART FOR THE AIRBAG CONTROL UNIT CODED AND/OR PARAMETER USING SVM CODE LISTED IN ETKA. MODELS A4, S4, A5, S5, Q5, TT, TTS, A3, PA , C6, A6 PA, D4, A8,C7 A7. *PE |
| TSB-69-10-02 | 2011-01-10. Service bulletin. AIR BAGS; AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE. AUDI: AIRBAG LIGHT ON. THE SOFTWARE IN AIRBAG CONTROL MODULE IS TOO SENSITIVE (ONLY AT ENGINE STARTUP) WHEN DIAGNOSING THE SIDE CRASH SENSORS. AS A RESULT, THE AIRBAG CONTROL MODULE CAN INCORRECTLY SET FALSE DTCS FOR CRASH SENSOR INCORRECT. THE SOFTWARE IN THE AIRBAG CONTROL MODULE MUST BE UPDATED TO REPAIR THIS CONDITION. *PE |
The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.