# B200F on the 2019 Audi A5

The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.

This code is specific to a manufacturer and is not described here.

## Bulletins for this model year that name B200F

- [11038031](https://open.wenmarpro.com/bulletins/11038031), 2026-10-05: This bulletin provides informaiton when DTC B200FF0 is stored.
- [11025405](https://open.wenmarpro.com/bulletins/11025405), 2025-11-08: This bulletinprovides information when DTCs B200FF0 to B200FF5 are stpredom the J775 suspension control unit.
- [11012489](https://open.wenmarpro.com/bulletins/11012489), 2025-01-07: This bulletin provides information when DTCs B200FF0 to B200FF5 stored in the J775 suspension control unit.
- [11007332](https://open.wenmarpro.com/bulletins/11007332), 2024-09-06: This bulletin provides information when there are various messages displayed; DTCs B200FF1 and/or B200FF2 stored in the camera control module.
- [11007251](https://open.wenmarpro.com/bulletins/11007251), 2024-09-06: This bulletin provides information when there are various messages displayed; DTCs B200FF1 and/or B200FF2 stored in the camera control module.
- [10250316](https://open.wenmarpro.com/bulletins/10250316), 2024-03-06: This bulletin provides information when DTCs B200FF0, B200FF1, B200FF3, or B200FF4, B200FF5 are stored in the J775 suspension control unit.
- [10238354](https://open.wenmarpro.com/bulletins/10238354), 2023-07-10: This bulletin provides information for when there is an active steering malfunction with DTC B200FF0.
- [10236615](https://open.wenmarpro.com/bulletins/10236615), 2023-06-06: This bulletin advises that if the warning lamp for the damper control in the instrument cluster is on, and DTC B200FF0 is stored to delete the DTC and perform suspension basic settings.
- [10236613](https://open.wenmarpro.com/bulletins/10236613), 2023-06-06: This bulletin provides information for when the messages "Air suspension: system fault" or "Shock absorber system/suspension" is shown in the instrument cluster, and one or more of the following DTCs are stored B200FF0, B200FF1, B200FF3, B200FF4, B200FF5.
- [10216015](https://open.wenmarpro.com/bulletins/10216015), 2022-08-03: This bulletin provides steps to address DTCs B200FF0, B200FF1, B200FF3, B200FF4, and B200FF5.