WenmarOpen by Wenmar Pro

Service bulletins for the 2009 Audi A4

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

775 on file from NHTSA, as of 2026-10-19.

By type

By component

By trouble code

Only bulletins with component: Engine are shown. Show all

Bulletins, newest first
001459202973722023-01-03. Service bulletin. ENGINE AND ENGINE COOLING. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
001349203357612023-01-03. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
A1922332061604_52022-12-06. Service bulletin. EQUIPMENT; ENGINE AND ENGINE COOLING. This bulletin contains instructions for resolving a coolant leak.
011403203322332022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
011383203300112022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
011373203322312022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. Engine warning light on after engine replacement
011330202708252022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. DTC P0234 (Turbo/Super Charger Overboost Condition) is stored in the engine control module, J623 (address word 01). No other DTCs are stored. Technical Background DTC P0234 can be set inadvertently by the software application.
011301203300122022-10-31. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
001463203357622022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION: OIL COOLER. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
001459202973722022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
001349203357612022-10-31. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
011463203363022022-09-26. Service bulletin. ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM. Because there are a number of different misfire faults (unrelated to ignition coil operation) that could cause the MIL to illuminate, proper Guided Fault Finding (GFF) misfire diagnosis must be followed before any ignition coils are replaced.
011403203322332022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
011383203300112022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
011373203322312022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Engine warning light on after engine replacement
011330202708252022-09-26. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. DTC P0234 (Turbo/Super Charger Overboost Condition) is stored in the engine control module, J623 (address word 01). No other DTCs are stored. Technical Background DTC P0234 can be set inadvertently by the software application.
011329203322322022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. The programmed values for the misfiring recognition are not automatically reset by deleting the memory once.
011301203300122022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
001463203357622022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
001459202973722022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
001349203357612022-09-26. Service bulletin. ENGINE AND ENGINE COOLING. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
1418203124572022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM); EQUIPMENT. Under certain driving conditions, the linkage for the waste gate actuation can encounter excessive wear which leads to play at the waste gate flap. This leads to boost escaping through a loose flap, which sets DTC P029900 (Negative Pressure Deviation).
1314203124552022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Under certain driving conditions, the linkage for the waste gate actuation can encounter excessive wear which leads to play at the waste gate flap. This leads to boost escaping through a loose flap, which sets DTC P0299 (Negative Pressure Deviation).
1313203124542022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Under certain driving conditions, the linkage for the waste gate actuation can encounter excessive wear which leads to play at the waste gate flap. This leads to boost escaping through a loose flap, which sets DTC P0299 (Negative Pressure Deviation).
1312203124532022-08-01. Service bulletin. ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER. Under certain driving conditions, the linkage for the waste gate actuation can encounter excessive wear which leads to play at the waste gate flap. This leads to boost escaping through a loose flap, which sets DTC P0299 (Negative Pressure Deviation).

The summaries are NHTSA's. Each bulletin's page links NHTSA's copy of the manufacturer's document.