B1006 on the 2020 Alfa Romeo Stelvio
The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.
This code is specific to a manufacturer and is not described here. Its meaning is in the manufacturer's service information.
| 0804520REVA | 2022-09-26. Service bulletin. Body Control Module (BCM) Reconfigure for Forward Collision Warning (FCW) This bulletin involves reconfiguring the BCM. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:B1006-49 - Camera - Internal Electronic Failure. C141C-86 - Video Camera Private Can Communication Failure - Signal Invalid. C1999-86 - Data set Failure-Signal Invalid. In addition, the customer may notice the following: The Electronic Vehicle Information Center (EVIC) displays "Forward Collision Warning (FCW) Limited Functionality Front Camera Service Required" |
|---|---|
| 08-045-20 REV. A | 2020-09-28. Service bulletin. Body Control Module (BCM) Reconfigure for Forward Collision Warning (FCW) This bulletin involves reconfiguring the BCM. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:B1006-49 - Camera - Internal Electronic Failure. C141C-86 - Video Camera Private Can Communication Failure - Signal Invalid. C1999-86 - Data set Failure-Signal Invalid. In addition, the customer may notice the following: The Electronic Vehicle Information Center (EVIC) displays "Forward Collision Warning (FCW) Limited Functionality Front Camera Service Required" |
| 9004199 | 2020-06-22. Service bulletin. MODULE, Lane Departure Warning (Forward facing camera/half module) For vehicles w/ Driver Assistance features, prior to replacing the HALF module (forward-facing camera module) refer to STAR ONLINE S2008000001: During PDI inspection you may find the FCW Limited Functionality message displayed in the EVIC. Upon scanning the vehicle for DTC?s you may find: 1) B1006-49 HALF ECU - Internal electronic failure C141C-86 Video camera private CAN communication failure - Signal invalid C1999-86 Dataset failure - Signal invalid If you are unable to clear the combined three DTC's and the EVIC displays, "FCW LIMITED AVAIL", Perform a ?Restore Proxy Configuration? under Guided Diagnostics in the left hand column of WiTech 2. After performing this procedure, the DTC?s should go to ?Stored? and can then be cleared. The FFCM was flashed in transit on these vehicles and the Restore Proxy Config procedure was never performed. The Restore Proxy Configuration is needed to complete the flash process. 2) B1007-54 Camera - Missing Calibration If you are unable to calibrate the HALF Module, via the procedure in the service manual, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair. |
| 08-045-20 | 2020-05-26. Service bulletin. Body Control Module (BCM) Reconfigure for Forward Collision Warning (FCW) This bulletin involves reconfiguring the BCM. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:B1006-49 - Camera - Internal Electronic Failure. C141C-86 - Video Camera Private Can Communication Failure - Signal Invalid. C1999-86 - Dataset Failure-Signal Invalid. In addition, the customer may notice the following:The Electronic Vehicle Information Center (EVIC) displays "Forward Collision Warning (FCW) Limited Functionality Front Camera Service Required"Fig. 1.EVIC FCW Message |
4 on file from NHTSA, as of 2026-10-19. See them in the bulletin list. A bulletin lists model years: read the document for which vehicles it concerns.