# Service bulletin 020522002

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 634837
- Published by NHTSA: 2002\-10\-09
- Manufacturer's number: 020522002
- Manufacturer's date: 2002\-06\-01
- NHTSA component: SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM

## NHTSA's summary

THIS BULLETIN IS BEING ISSUED TO REVISE THE VACUUM BRAKE BOOSTER REPLACEMENT PROCEDURE. \*TT

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Brakes

## Vehicles listed

- 2001 to 2002 CHEVROLET VENTURE
- 2001 to 2002 OLDSMOBILE SILHOUETTE
- 2001 to 2002 PONTIAC MONTANA

## Other bulletins for the same vehicles and component

- [PIP4723F](/bulletins/10208027.md), 2022-02-14, Service bulletin: SERVICE BRAKES, HYDRAULIC; FUEL SYSTEM, GASOLINE. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
- [01\-00\-89\-010J](/bulletins/10138197.md), 2018-05-21, Service bulletin: ENGINE; SERVICE BRAKES; EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides a revision for 01\-00\-89\-010I to add the 2013 model year.
- [PIT4907A](/bulletins/10112560.md), 2017-08-15, Service bulletin: SERVICE BRAKES. This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
- [PIT4943C](/bulletins/10111927.md), 2017-08-15, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; FUEL SYSTEM, GASOLINE; SERVICE BRAKES, HYDRAULIC. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch\_H2O to milimeter\_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413\-A / J 41413\-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH\-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH\-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413\-A / J 41413\-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.
- [3405](/bulletins/10017233.md), 2005-10-29, Service bulletin: SERVICE BRAKES, AIR:ANTILOCK:ABS WARNING LIGHT. INTERMITTENT ABS INDICATOR LIGHT ILLUMINATING. \*TT
- [3477](/bulletins/10014875.md), 2005-05-11, Service bulletin: SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR. TECH 2 DISPLAYS ASTERISK FOR THE LEFT FRONT WHEEL SPEED SENSOR. \*TT
- [040523002](/bulletins/10012633.md), 2005-03-09, Service bulletin: SERVICE BRAKES, HYDRAULIC. BRAKE ROTOR MINIMUM ALLOWABLE THICKNESS AFTER REFINISH SPECIFICATION CORRECTION. \*TT
- [04082004](/bulletins/10009210.md), 2004-09-17, Service bulletin: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR. THE CURRENT BRAKE ROTOR MINIMUM ALLOWABLE THICKNESS AFTER REFINISH, OR MINIMUM THICKNESS SPECIFICATION, FOUND IN THE PAST SERVICE MANUAL APPLICATIONS ARE INCORRECT. PLEASE USE CORRECT INFORMATION AS FOLLOWS. \*TT
- [01521](/bulletins/10005458.md), 2004-02-28, Service bulletin: PARKING BRAKE:CONVENTIONAL:MECHANICAL:LINKAGE AND CABLE. REAR PARKING BRAKE CABLE RATTLE NOISE LEFT REAR SUSPENSION. \*TT \*MJ
- [030525004](/bulletins/10002373.md), 2003-08-26, Service bulletin: SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP. ANTI\-LOCK BRAKE SYSTEM \(ABS\) AND/OR TRACTION CONTROL LAMP ON, ALL\-WHEEL DRIVE \(AWD\) DISABLED MESSAGE DISPLAYED, DIAGNOSTIC TROUBLE CODES \(DTCS\) SET. \*TT

JSON: [/v1/bulletins/634837](/v1/bulletins/634837)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20020522002&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F634837&vehicle=Service%20bulletin%20020522002)