# Service bulletin 15165

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 624643
- Published by NHTSA: 2001\-11\-08
- Manufacturer's number: 15165
- Manufacturer's date: 2001\-08\-01
- NHTSA component: ENGINE AND ENGINE COOLING:ENGINE:GASOLINE

## NHTSA's summary

SOME VEHICLES MAY EXHIBIT AN INTERMITTENT STALL ON DECELERATION, AT STOPS, LOW SPEEDS. \*YH

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Engine

## Vehicles listed

- 2001 FORD RANGER

## Other bulletins for the same vehicles and component

- [CSP\-08B01](/bulletins/10026389.md), 2008-10-24, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR. FORD: CERTAIN 1999\-2001 MODEL YEAR VEHICLES UP TO 6000 LB GVWR REGISTERED IN NEW YORK AND CERTAIN 2001 VEHICLES UP TO 6000 LB GVWR REGISTERED IN THE STATE OF MAINE, CERTIFIED FOR SALE IN CALIFORNIA\-FEDERAL EMISSION WARRANTY REFUND. \*PE
- [06166](/bulletins/10021051.md), 2007-02-27, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. POSSIBLE ENGINE DAMAGE \- INSTALL SPECIAL SERVICE TOOLS PRIOR TO REMOVING CRANKSHAFT PULLEY BOLT. \*KB
- [06116](/bulletins/10020173.md), 2006-08-04, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. POSSIBLE ENGINE DAMAGE \- INSTALL SPECIAL SERVICE TOOLS PRIOR TO REMOVING CRANKSHAFT PULLEY BOLT \- SERVICE TIP. \*TT
- [052212](/bulletins/10018746.md), 2006-01-13, Service bulletin: ENGINE AND ENGINE COOLING. BUCK/JERK AND MISS DURING DRIVE CYCLE ABOVE 3000 RPM \- NO DTC \- 3.0L 2V GAS AND FFV ENGINE. \*TT
- [18375](/bulletins/10013315.md), 2005-04-14, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. HIGH IDLE AT COLD START. \*TT
- [16305](/bulletins/10013075.md), 2005-04-07, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. ENGINE TIMING SERVICE TOOLS / SERVICE TIP. \*TT
- [020801](/bulletins/10011150.md), 2005-01-04, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. RATTLE NOISE FROM PRIMARY CHAIN DRIVE AREA 2000\-3000 RPM \- 4.0L SOHC ENGINE. \*TT
- [0486](/bulletins/10008547.md), 2004-08-04, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. BOOM/VIBRATION AT 1800\-2200 RPM, ROUGH IDLE. \*TT
- [02221](/bulletins/10008304.md), 2004-07-27, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. ENGINE\-GEAR DRIVEN SYNCHRONIZERS\-INCORRECT INSTALLATION\-CAMSHAFT POSITION SYNCHRONIZER \(CMP\) INSTALLATION TOOL CORRECT APPLICATION. \*MJ
- [16461](/bulletins/10008146.md), 2004-07-23, Service bulletin: ENGINE AND ENGINE COOLING:ENGINE. TOOL KIT CONTAINS THE TIMING PEG USED TO LOCK THE CRANKSHAFT IN PLACE WHEN PERFORMING CRANKSHAFT PULLEY OR ENGINE TIMING SERVICE. \*TT

JSON: [/v1/bulletins/624643](/v1/bulletins/624643)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2015165&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F624643&vehicle=Service%20bulletin%2015165)