Service bulletin NTB00016
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 610984 |
| Published by NHTSA | 2000-05-23 |
| Manufacturer's number | NTB00016 |
| Manufacturer's date | 2000-02-11 |
| NHTSA component | SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS |
NHTSA's summary
SOME VEHICLES MAY DEMONSTRATE A LOUD, LOW FREQUENCY GROAN NOISE COMING FROM THE FRONT BRAKES DURING STOPPING. *TT
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Brakes
| NISSAN MAXIMA | 2000 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| NTB04094A | 2021-05-10. Service bulletin. If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see NTB00-033). See this bulletin for further detail. |
|---|---|
| NTB00033E | 2021-05-10. Service bulletin. SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake incident based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific incident. See this bulletin for further details. |
| NTB00088 | 2001-04-30. Service bulletin. SOME VEHICLES MAY EXHIBIT STEERING WHEEL / BODY VIBRATION OR BRAKE PEDAL PULSATION WHEN BRAKING (ESPECIALLY DURING HIGH SPEED BRAKING),AND / OR BRAKE JUDDER. *TT |