# Service bulletin NTB99037

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 606571
- Published by NHTSA: 1999\-08\-27
- Manufacturer's number: NTB99037
- Manufacturer's date: 1999\-06\-09
- NHTSA component: EQUIPMENT:APPLIANCE:AIR CONDITIONER

## NHTSA's summary

INFORMATION REGARDING THE AIR CONDITIONING \(A/C\) HIGH PRESSURE HOSE SERVICE CAMPAIGN. \*TT

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Equipment and accessories, Heating and air conditioning

## Vehicles listed

- 1997 to 1998 NISSAN 200SX
- 1999 NISSAN 200SX
- 1997 to 1999 NISSAN SENTRA

## Other bulletins for the same vehicles and component

- [NTB00042D](/bulletins/10192513.md), 2021-05-10, Service bulletin: AIR BAGS; BACK OVER PREVENTION; EQUIPMENT. SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat\-Mounted Side\-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Nissan STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non\-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
- [NTB08055C](/bulletins/10192305.md), 2021-05-10, Service bulletin: EQUIPMENT; AIR BAGS. SERVICE INFORMATION Information necessary to service the Supplemental Restraint System \(SRS\) safely is included in the "RESTRAINTS" section of the Electronic Service Manual \(ESM\) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
- [NTB92123D](/bulletins/10192233.md), 2021-05-10, Service bulletin: WHEELS; EQUIPMENT. Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating \(clear, chrome, titanium, etc.\), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletinfor further detail.
- [NTB99\-037a](/bulletins/10181008.md), 2020-10-08, Service bulletin: EQUIPMENT:APPLIANCE:AIR CONDITIONER. SENTRA/200SX A/C HIGH PRESSURE HOSE SERVICE CAMPAIGN Service Campaign ID \# P9111 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID \# P9111. • Discard all previous versions of NTB99\-037.
- [NTB98\-048a](/bulletins/10178241.md), 2020-08-09, Service bulletin: ENGINE AND ENGINE COOLING; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. VOLUNTARY SERVICE CAMPAIGN ENGINE MOUNT REPLACEMENT Service Campaign ID \# PU803 is no longer active. • Repair orders opened after this bulletin’s published date are no longer eligible for reimbursement under Campaign ID \# PU803. • Discard all previous versions of NTB98\-048.
- [NTB\-09\-129](/bulletins/10032506.md), 2010-04-07, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. NISSAN: VENT CONTROL VALVE REPLACEMENT. WHEN REPLACING THE EVAP CANISTER VENT CONTROL VALVE FOR REASON: USE THE ONE LISTED ON PAGE 2; FOR VENT CONTROL VALVE REPLACEMENT PROCEDURE, REFER TO THE APPROPRIATE SECTION OF THE ELECTRONIC SERVICE MANUALS \(ESM; WHEN INSTALLING THE NEW VALVE, DO NOT ADD ANY LUBE TO ITS O RING; FOR FRONTIER \(D40 SERIES\) ONLY, INSTALL THE PROTECTOR LISTED IN PARTS INFORMATION. \*PE INCLUDES 2005\-09 FRONTIER. UPDATED 12/8/10. \*PE
- [NTB01057](/bulletins/624064.md), 2001-11-01, Service bulletin: EQUIPMENT; UNKNOWN OR OTHER. SUBJECT PERTAINING TO REVISED MAINTENANCE PROCEDURES.\*JB

JSON: [/v1/bulletins/606571](/v1/bulletins/606571)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20NTB99037&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F606571&vehicle=Service%20bulletin%20NTB99037)