# Service bulletin 00598

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 603879
- Published by NHTSA: 1999\-03\-09
- Manufacturer's number: 00598
- Manufacturer's date: 1998\-05\-06
- NHTSA component: SERVICE BRAKES, HYDRAULIC:BRAKE FLUID LOW WARNING: LAMP

## NHTSA's summary

SUBJECT REGARDING BRAKE WARNING LIGHT ON CONSTANTLY. \*YC

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Brakes

## Vehicles listed

- 1997 to 1998 MAZDA PROTEGE

## Other bulletins for the same vehicles and component

- [00\-003\-18\-3480a](/bulletins/10148003.md), 2018-11-13, Service bulletin: SERVICE BRAKES, HYDRAULIC; EQUIPMENT. Mazda North American Operations has approved an additional on\-car brake lathe as an option for MNAO authorized equipment. The Pro\-Cut On\-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu\-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on\-car brake lathe, or warranty claims are subject to denial or debit.
- [00\-003\-18\-3480](/bulletins/10142515.md), 2018-07-02, Service bulletin: SERVICE BRAKES. Mazda North American Operations has approved an additional on\-car brake lathe as an option for MNAOauthorized equipment. The Pro\-Cut On\-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu\-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on\-car brake lathe, or warranty claimsare subject to denial or debit.
- [00299](/bulletins/605988.md), 1999-08-04, Service bulletin: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER. EXPERIENCING POPPING NOISE FROM FRONT BRAKE CALIPER DURING SLOW SPEED BRAKING. \*TT

JSON: [/v1/bulletins/603879](/v1/bulletins/603879)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2000598&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F603879&vehicle=Service%20bulletin%2000598)