Service bulletin NTB97001
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 51294 |
| Published by NHTSA | 1997-06-27 |
| Manufacturer's number | NTB97001 |
| Manufacturer's date | 1997-01-15 |
| NHTSA component | EQUIPMENT:ELECTRICAL |
NHTSA's summary
MALFUNCTION INDICATOR LAMP "ON" INCIDENT DTC P1105 AND/OR DTC P0105 STORED IN THE ENGINE CONTROL MODULE, THE CAUSE MAY BE A STICKING MAP/ BARO SWITCH SOLENOID VALVE. *JD
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Equipment and accessories
Trouble codes named
P0105, P1105
| NISSAN PATHFINDER | 1997 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| NTB08055C | 2021-05-10. Service bulletin. SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail. |
|---|---|
| NTB92123D | 2021-05-10. Service bulletin. Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletinfor further detail. |
| NTB-09-129 | 2010-04-07. Service bulletin. NISSAN: VENT CONTROL VALVE REPLACEMENT. WHEN REPLACING THE EVAP CANISTER VENT CONTROL VALVE FOR REASON: USE THE ONE LISTED ON PAGE 2; FOR VENT CONTROL VALVE REPLACEMENT PROCEDURE, REFER TO THE APPROPRIATE SECTION OF THE ELECTRONIC SERVICE MANUALS (ESM; WHEN INSTALLING THE NEW VALVE, DO NOT ADD ANY LUBE TO ITS O RING; FOR FRONTIER (D40 SERIES) ONLY, INSTALL THE PROTECTOR LISTED IN PARTS INFORMATION. *PE INCLUDES 2005-09 FRONTIER. UPDATED 12/8/10. *PE |
| NTB01057 | 2001-11-01. Service bulletin. SUBJECT PERTAINING TO REVISED MAINTENANCE PROCEDURES.*JB |
| NTB99027 | 1999-05-12. Service bulletin. REPLACEMENT PROCEDURES FOR CARGO NET HOOKS. *TT |
| NTB98034 | 1998-08-28. Service bulletin. CD PLAYER EXPERIENCING IMPROPER OPERATION DUE TO HOT AIR FROM HVAC UNIT. *YC |
| NTB98009 | 1998-05-11. Service bulletin. VEHICLES BUILT BEFORE JN8AR05Y7WW251388 MAY EXHIBIT AN A/C IDLE PULLEY BEARING NOISE. *YC |