# Service bulletin 2079586/3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11039599
- Published by NHTSA: 2026\-11\-07
- Manufacturer's number: 2079586/3
- Manufacturer's date: 2026\-10\-28
- NHTSA component: EXTERIOR LIGHTING; ELECTRICAL SYSTEM

## NHTSA's summary

Right \& Left rear turn signal bulb open circuit DTCs \| Bentayga Series. Customer Statement: Customer reports that ‘’Bulb Warning’’ is illuminated on the Driver’s Instrument Panel

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2026/MC-11039599-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2026/MC-11039599-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Lighting

## Vehicles listed

- 2024 to 2026 BENTLEY BENTAYGA

## Other bulletins for the same vehicles and component

- [2061195/5](/bulletins/11039635.md), 2026-11-07, Service bulletin: ELECTRICAL SYSTEM. Telephone Functionality Complaint \- Minimum Standards Required For Analysis Of Concerns.
- [2082002/2](/bulletins/11039633.md), 2026-11-07, Service bulletin: ELECTRICAL SYSTEM; SUSPENSION. B200FFE \- Internal Malfunction Logged in Sway Stablization Control Units \(00D4/00D5\). Customer statement / workshop findings: During fault finding, the following may be observed: DTC B200FFE \(Internal Malfunction\) stored in the following diagnostic address: • Front Sway Stablization Control Unit \(00D4\) Or • Rear Sway Stablization Control Unit \(00D5\)
- [2081721/3](/bulletins/11039631.md), 2026-11-07, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY. Vehicle Central Locking – Door Locking / Unlocking Functional Complaints
- [2080901/3](/bulletins/11039628.md), 2026-11-07, Service bulletin: ELECTRICAL SYSTEM. Sporadic entries \- Nano connector contact testing
- [2080680/3](/bulletins/11039622.md), 2026-11-07, Service bulletin: STRUCTURE:BODY; VISIBILITY/WIPER; ELECTRICAL SYSTEM. Organ stop air regulator jammed / broken / electrical value wrong reading. Customer Statement: Airflow from the organ stops \(air regulators\) is not functioning correctly; vents may be stuck, broken, or showing incorrect operation
- [2080489/3](/bulletins/11039620.md), 2026-11-07, Service bulletin: STRUCTURE:BODY; VISIBILITY/WIPER; ELECTRICAL SYSTEM. Front window one\-touch open/close function inoperative \- DTCs evident in 0042/0052. Customer statement: Front window operation fails when using single press \(one touch\) close/open.
- [2080195/2](/bulletins/11039618.md), 2026-11-07, Service bulletin: ELECTRICAL SYSTEM. Asterix check for My Bentley error \- DTC U163D00 evident in 005F. Customer Statement: Customers experiencing a “My Bentley error” on the vehicle MIB, and are unable to use any App studio features, as per the examples in figure 1 and 2 below.
- [2078190/8](/bulletins/11039608.md), 2026-11-07, Service bulletin: VISIBILITY/WIPER; ELECTRICAL SYSTEM. AC System not Cooling \- HVAC Leakage. Customer Statement: The customer may find that the A/C system not blowing cold air and / or Cooling performance has declined over time.
- [2081449/4](/bulletins/11039603.md), 2026-11-07, Service bulletin: ELECTRICAL SYSTEM; STRUCTURE:BODY; VISIBILITY/WIPER. Window Drop Glass Anti‑Trap Activating / Window Bounce‑Back \| Bentayga. Customer Statement: Customers may report windows stop and reverse shortly before reaching the midpoint or fully closed position.
- [2083462/1](/bulletins/11039568.md), 2026-11-06, Service bulletin: STRUCTURE:BODY; BACK OVER PREVENTION: WARNINGS; ELECTRICAL SYSTEM. PDC Sensor Bracket Detaching \| All models Customer statement / workshop findings: This TPI has been issued to address cases where the adhesion quality of the parking sensor \(PDC\) bracket may be insufficient, potentially resulting in detachment of the bracket from the front or rear bumper assembly. The repair procedure outlined in this document provides guidance for the reinstallation of the PDC sensor and bracket and requires the replacement of the adhesive attachment tape with approved 3M adhesive tape to ensure a secure and durable bond between the bracket and bumper assembly.

JSON: [/v1/bulletins/11039599](/v1/bulletins/11039599)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%202079586%2F3&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11039599&vehicle=Service%20bulletin%202079586%2F3)
