WenmarOpen by Wenmar Pro

Service bulletin LI47.70-P-079912

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11038189
Published by NHTSA2026-10-06
Manufacturer's numberLI47.70-P-079912
Manufacturer's date2026-09-29
NHTSA componentELECTRICAL SYSTEM

NHTSA's summary

Complaint Vehicle will not start after DC charging Warning in the instrument cluster related to High‑voltage on board electrical system The following fault codes related to stuck contactor can be found in the High Voltage Control units : PTCU ‑ N127 (Powertrain control unit) • P154900 ‑ There is a warning due to overcurrent in the charging system of the high‑voltage electric circuit. • P154A00 ‑ There is a warning due to a detected crash event at standstill. • P154B00 ‑ There is a warning due to a stuck contactor. DCB223 ‑ N116/5 (Direct current charge connection unit) • P0E8929 ‑ The input current of the on‑board DC charging connection unit is too high. There is an invalid signal. • P2BC500 ‑ The contact ''Positive terminal'' of the contactor in the on‑board DC current charge‑connection unit is jammed closed • P2BCC00 ‑ The contact ''Negative terminal'' of the contactor in the onboard DC current charge‑connection unit is jammed closed. Instrument cluster warning messages : Cause • Current ripple due to EVSE (Electric Vehicle Supply Equipment) • Overcurrent or Overvoltage due to EVSE (Electric Vehicle Supply Equipment) • DCB contactors did not open immediately due to welding time at the end of DC charging Remedy • Check for a new software availability for DCCU (N116/5 ‑ Direct Current Charge connection Unit). If a new software is available, update the software first. • Reset contactor fault through special procedure without password. ( N116/5 >> Special Procedure >> Resetting of contactor fault.) Important Note : • Do not replace component DCB (N116/5) • If fault codes are not erasable, please raise a TIPS case and send it to HQ.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Trouble codes named

P0E89, P1549, P154A, P154B, P2BC5, P2BCC

Vehicles listed
MERCEDES BENZ GLE 450E 4MATIC2026
MERCEDES-BENZ AMG E 53 E 4MATIC+2025
MERCEDES-BENZ AMG E53E 4MATIC2027
MERCEDES-BENZ AMG E53E 4MATIC WAGON2027
MERCEDES-BENZ AMG GLC63 S E2025
MERCEDES-BENZ AMG GLC63 S E 4MATIC+2025 to 2026
MERCEDES-BENZ AMG GLC63 S E 4MATIC+ COUPE2025 to 2026
MERCEDES-BENZ AMG S 63 E 4MATIC+2024 to 2026
MERCEDES-BENZ E53 E 4MATIC+2025
MERCEDES-BENZ E53 E 4MATIC+ ALL-TERRAIN2026
MERCEDES-BENZ GLC 350 E 4MATIC2025 to 2027
MERCEDES-BENZ GLE 450E 4MATIC2024 to 2025
MERCEDES-BENZ S 580 E2023
MERCEDES-BENZ S 580 E 4MATIC2023 to 2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.