WenmarOpen by Wenmar Pro

Service bulletin 114739

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11037595
Published by NHTSA2026-09-30
Manufacturer's number114739
Manufacturer's date2026-09-24
NHTSA componentPOWER TRAIN

NHTSA's summary

TRANSMISSION KIT - WITH TORQUE CONVERTER

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Vehicles listed
RAM 25002025, 2026
RAM 35002025, 2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
20262252026-05-07. Powertrain
26V2880002026-05-07. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
25V2970002025-05-08. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
08-302-262026-08-06. Service bulletin. Flash: Electronic Shift Module (ESM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● U1057-00 - High Speed Fd-Can3 Communication Bus Performance. Customers may also comment on the following: ● If the vehicle has a low or drained battery and requires a jump start, once jump started, the vehicle will not shift out of Park. This bulletin involves reprogramming the ESM with the latest available software.
08-301-262026-08-06. Service bulletin. Flash: Electronic Shift Module (ESM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● U1057-00 - High Speed Fd-Can3 Communication Bus Performance. Customers may also comment on the following: ● If the vehicle has a low or drained battery and requires a jump start, once jump started, the vehicle will not shift out of Park. This bulletin involves reprogramming the ESM with the latest available software.
18-038-26 REV. A2026-08-06. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set SYMPTOM: one or more of the following Diagnostic Trouble Codes (DTCs): ● P219A - Bank 1 Air-Fuel Ratio Imbalance. ● P219B - Bank 2 Air-fuel Ratio Imbalance. ● P032F - Combustion Engine Producing Insufficient Torque. NOTE: This revision has an updated and more effective fix for DTC P219B than the prior version. Customers may experience one or more of the following: ● **Power Take Off (PTO) may cancel during engagement with high PTO loads.** ● Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. ● Stationary Idle PTO feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). ● PTO not auto-resuming after hard-wired remote start (DD/DP Only). ● Driveline clunk or bump when coasting to a stop in cruise control mode. ● Engine idle undershoot or delayed response with power steering input. In addition, the following software enhancement(s) is available: ● Increase the duration that PTO related messages are displayed on the Instrument Panel Cluster (IPC) (DD/DP Only). This bulletin involves reprogramming the PCM with the latest available software.
18-067-26 REV. A2026-07-23. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0088-00 - Fuel Rail Pressure Too High - Bank 1. ● P208B-00 - Reductant Pump 1 Control Performance. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
S2523000088 REV.B2026-07-18. Service bulletin. Vehicle Shifter Will Not Shift Out Of Park.
18-067-262026-07-18. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0088-00 - Fuel Rail Pressure Too High - Bank 1. ● P208B-00 - Reductant Pump 1 Control Performance. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. ● P0506-00 - Idle Control System RPM - Lower Than Expected. ● P20CF-00 - Exhaust Aftertreatment Fuel Injector "A" Stuck Open. ● P20DB-00 - Exhaust Aftertreatment Fuel Supply Control Stuck Open. ● P040B-00 - EGR Temperature Sensor 1 Circuit Performance. ● U0109-00 - Lost Communication With Fuel Pump Control Module. ● P1451-00 - Diesel Particulate Filter System Performance. ● P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. ● P1191-00-Inlet Air Temperature Sensor Rational/Performance. ● P242F-00-Diesel Particulate Filter Restriction - Ash Accumulation. ● P229F-00 - NOX Sensor Circuit Range/Performance - Bank 1. ● P2281-00 - Air Leak Between MAF And Throttle Body. ● P0087-00 - Fuel Rail Pressure Too Low. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. ● P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. ● P214D-00 - SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. ● P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. ● P24DA - Particulate Matter Sensor Exhaust Sample Error Bank 1. ● P20EE-00 - SCR NOx Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. ● P226C-00 - Turbocharger Boost Control "A" Slow Response. ● P2281-00 - Air Leak Between Maf And Throttle Body. ● P229F-00 - Nox Sensor Circuit Range/performance - Bank 1. ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P203F-00 - Reductant Level Too Low. ● P0423-00 - Heated Catalyst Efficiency Below Threshold Bank 1. ● P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-066-262026-07-18. Service bulletin. Seed Request Denied During Technicians may experience the following: SYMPTOM: ● The scan tool displays the message "Seed Request denied" when attempting to reprogram the PCM to the latest available software.
18-025-26 REV. B2026-07-18. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0088-00 - Fuel Rail Pressure Too High - Bank 1. ● P208B-00 - Reductant Pump 1 Control Performance. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. ● P0506-00 - Idle Control System RPM - Lower Than Expected. ● P20CF-00 - Exhaust Aftertreatment Fuel Injector "A" Stuck Open. ● P20DB-00 - Exhaust Aftertreatment Fuel Supply Control Stuck Open. ● P040B-00 - EGR Temperature Sensor 1 Circuit Performance. ● U0109-00 - Lost Communication With Fuel Pump Control Module. ● P1451-00 - Diesel Particulate Filter System Performance. ● P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. ● P1191-00 - Inlet Air Temperature Sensor Rational/Performance. ● P242F-00 - Diesel Particulate Filter Restriction - Ash Accumulation. ● P229F-00 - NOX Sensor Circuit Range/Performance - Bank 1. ● P2281-00 - Air Leak Between MAF And Throttle Body. ● P0087-00 - Fuel Rail Pressure Too Low. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. ● P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. ● P214D-00 - SCR NOx Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. ● P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. ● P24DA - Particulate Matter Sensor Exhaust Sample Error Bank 1. ● P20EE-00 - SCR NOx Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. ● P226C-00 - Turbocharger Boost Control "A" Slow Response. ● P2281-00 - Air Leak Between Maf And Throttle Body. ● P229F-00 - Nox Sensor Circuit Range/performance - Bank 1. ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P203F-00 - Reductant Level Too Low. ● P0423-00 - Heated Catalyst Efficiency Below Threshold Bank 1. ● P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
18-061-26 REV. A2026-07-08. Service bulletin. SA Market Only - Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0088-00 - Fuel Rail Pressure Too High - Bank 1.** ● P0263-00 - Cylinder 1 Contribution/Balance. ● P0266-00 - Cylinder 2 Contribution/Balance. ● P0269-00 - Cylinder 3 Contribution/Balance. ● P0272-00 - Cylinder 4 Contribution/Balance. ● P0275-00 - Cylinder 5 Contribution/Balance. ● P0278-00 - Cylinder 6 Contribution/Balance. Customers may also comment one or more of the following: ● The engine runs rough and exhibits stumbling and shaking. ● Loss of power. NOTE: The perceived loss of power is due to an insufficient injector/torque response. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
S2523000055 REV.D2026-07-02. Service bulletin. Mil-On/Check Engine Lamp (CEL), Antilock Brake System (ABS) Lamp, Diagnostic Trouble Code (DTCs).