WenmarOpen by Wenmar Pro

Other DRW60 Warr

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeOther
NHTSA id11036716
Published by NHTSA2026-09-02
Manufacturer's numberDRW60 Warr
Manufacturer's date2026-08-12
Campaign id or software versionDRW60
NHTSA componentSTRUCTURE:BODY
Manufacturer's systemDoor Glass

NHTSA's summary

Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehicles. Please see the description, model, year, and VIN range below. Concern Outline: On certain subject vehicles, the rear door glass holder may detach from the door glass due to improper urethane adhesion. If the glass holder separates from the door glass, a rattling noise may occur, and the door glass may not roll down. Repair Outline: Replace both rear door glass in the vehicle (the rear door quarter glass is not affected).

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame

Vehicles listed
MAZDA CX-502026
MAZDA CX-50 HYBRID2026 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
DRW60 Warr b2026-10-03. Service campaign. Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehicles. Please see the description, model, year, and VIN range below. Concern Outline: On certain subject vehicles, the rear door glass holder may detach from the door glass due to improper urethane adhesion. If the glass holder separates from the door glass, a rattling noise may occur, and the door glass may not roll down. Repair Outline: Replace both rear door glass in the vehicle (the rear door quarter glass is not affected).
DRW60 Repair a2026-09-02. Service campaign. Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehicles. Please see the description, model, year, and VIN range below. Concern Outline: On certain subject vehicles, the rear door glass holder may detach from the door glass due to improper urethane adhesion. If the glass holder separates from the door glass, a rattling noise may occur, and the door glass may not roll down. Repair Outline: Replace both rear door glass in the vehicle (the rear door quarter glass is not affected).
DRW60 Repair2026-09-02. Service campaign. Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehicles. Please see the description, model, year, and VIN range below. Concern Outline: On certain subject vehicles, the rear door glass holder may detach from the door glass due to improper urethane adhesion. If the glass holder separates from the door glass, a rattling noise may occur, and the door glass may not roll down. Repair Outline: Replace both rear door glass in the vehicle (the rear door quarter glass is not affected).
DRW60 Dlr Ltr2026-09-02. Service campaign. Subject: Notification of Dealer Re-Work (DRW60) – 2026MY CX-50 and CX-50 Hybrid - Rear Door Glass Holder Detach Issue Dear Mazda Dealer Colleagues, Mazda Motor Corporation has decided to conduct a Dealer Re-Work on certain 2026MY CX-50 and CX-50 Hybrid vehicles. Please see the description, model, year, and VIN range below. Concern Outline: On certain subject vehicles, the rear door glass holder may detach from the door glass due to improper urethane adhesion. If the glass holder separates from the door glass, a rattling noise may occur, and the door glass may not roll down. Repair Outline: Replace both rear door glass in the vehicle (the rear door quarter glass is not affected).
SA-031-262026-05-05. Service bulletin. DESCRIPTION Some vehicles may require the replacement of a damaged VIN plate or vehicle certification label. To obtain a replacement VIN plate (bulkhead-mounted and visible through the lower-left area of the windshield), contact DAG (Dealer Assistance Group) using VIN Plate Request Form available on One Mazda. To obtain a replacement vehicle certification label (located on the B􀀀pillar or front door), contact your assigned DSM (District Service Manager) to place the order. If DSM contact information is not available, refer to the Dealer & Field Contact Directory.
SA-021-262026-05-05. Service bulletin. This Service Alert supersedes the previously issued SAs and bulletin(s) listed below: The changes are noted below in red. SA-010/23 02/09/23 DESCRIPTION Some customers may experience one or more electrical malfunctions after a vehicle body repair. A newly painted fender stay (2) may be causing a poor front harness (1) ground connection. The front fender stay (2) newly painted surface at ground point (3), where attachment bolt (4) is seated, may create a poor front harness ground connection. NOTE: DO NOT paint ground point (3) attachment bolt (4) is seated. NEWLY INSTALLED FRONT FENDER STAY NOTE: CAUTION: If the bolt (4) contact area (3) is painted when the front fender stay (2) is newly replaced, it could cause a malfunction in the PCM. Before painting a newly replaced part, protect the bolt (4) contact area (3) with masking tape (5) as shown in the figure.
SA-008-26a2026-05-04. Service bulletin. During PDI, an indentation in the rear bumper may be noticed, or in some cases, the customer may return after delivery to report the indentation. Follow the steps below to repair the concern. REPAIR PROCEDURE Check the rear bumper for an indentation. Repair bumper.
SA-008-262026-03-04. Service bulletin. This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-041/25 10/31/25 and 09/10/25 During PDI, an indentation in the rear bumper may be noticed, or in some cases, the customer may return after delivery to report the indentation. Follow the steps below to repair the concern.
SA-004-262026-02-03. Service bulletin. Some customers may complain that a door beltline molding is loose, fell off, or is missing.
09-010-25b2025-12-04. Service bulletin. Some customers may complain about a rattle from the sunroof (panorama roof) area. Make sure to read the complete repair procedure before attempting any repairs as the sunroof may have rattles from more than one location. The rattle noise may be caused by: Looseness in the side cover fitting part 1. Looseness in the cross brace cover clip 2. Looseness in the movable part inside the sunroof unit 3. To eliminate this concern, the following changes have been implemented. CAUSE 1: The shape of the side cover and clips have been modified to reduce the movement causing the rattle noise CAUSE 2: Improvement of the assembly process CAUSE 3: Modification of dimensions of the moving parts