# Service bulletin LI54.65\-P\-080529

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11036527
- Published by NHTSA: 2026\-09\-01
- Manufacturer's number: LI54.65\-P\-080529
- Manufacturer's date: 2026\-08\-26
- NHTSA component: BACK OVER PREVENTION: REARVIEW SYSTEM BRAKING

## NHTSA's summary

Complaint Frequent rear view camera flap actuations and/or noise associated. NOTE: Rear view camera functions are NOT affected and still perform in accordance with regulatory requirements. Cause Calibration of the reversing camera is in progress. This is not a malfunction, but an intended system behavior. Remedy An optimization has been implemented to reduce the quantity of rearview camera flap actuations for calibration. Open an XSS case requesting addition of the option code "0O1" \(Zero, "O", "1"\). Once the code has been added, update and SCN code PARK \(N62/\*\) control unit. Prior to releasing the vehicle, please verify the following: • Rear camera flap when calibrating after a key cycle bus sleep will stay open to 29 MPH and then close. Will re‑open, when calibrating, at 9 MPH.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2026/MC-11036527-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2026/MC-11036527-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2024 to 2026 MERCEDES\-BENZ AMG GLC43
- 2024 to 2026 MERCEDES\-BENZ AMG GLC43 4MATIC
- 2023 MERCEDES\-BENZ AMG GLC63 S
- 2025 MERCEDES\-BENZ AMG GLC63 S E
- 2025 to 2026 MERCEDES\-BENZ AMG GLC63 S E 4MATIC\+
- 2023 to 2026 MERCEDES\-BENZ GLC 300
- 2023 to 2026 MERCEDES\-BENZ GLC 300 4MATIC
- 2025 to 2026 MERCEDES\-BENZ GLC 350 E 4MATIC

JSON: [/v1/bulletins/11036527](/v1/bulletins/11036527)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20LI54.65-P-080529&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11036527&vehicle=Service%20bulletin%20LI54.65-P-080529)