WenmarOpen by Wenmar Pro

Service bulletin 112837

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11034329
Published by NHTSA2026-07-02
Manufacturer's number112837
Manufacturer's date2026-06-16
NHTSA componentSTRUCTURE:BODY

NHTSA's summary

ARMREST - FRONT DOOR TRIM & PANEL - FRONT DOOR TRIM

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame

Vehicles listed
RAM 15002025, 2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
23-048-26 REV. A2026-10-07. Service bulletin. Multi-function Tailgate Requires High Closing Effort Customers may comment on the following: SYMPTOM: ● Difficulty closing the right-hand Multi-Function Tailgate due to high closing effort. This bulletin involves inspecting and possibly adjusting the Multi-Function tailgate.
23-048-262026-09-30. Service bulletin. Not applicable to vehicles built for US market. Multi-function Tailgate Requires High Closing Effort Customers may comment on the following: SYMPTOM: ● Difficulty closing the right-hand Multi-Function Tailgate due to high closing effort. This bulletin involves inspecting and possibly adjusting the Multi-function tailgate.
91008922026-09-10. Service bulletin. Switch - Tailgate Handle Prior to replacing the Tailgate Handle Switch, please review MasterTech Article - Tailgate Handle Inoperative.
91008862026-09-03. Service bulletin. Sunroof Assy Sunroof glass and/or sunshade cannot open/close (inoperative). 1. Please follow the service procedure: 08-Electrical/8N - Power Systems/ Power Top, Sunroof/ Diagnosis and Testing. 2. If sunroof motors continue to be inoperative, please contact STAR and reference SET 1599. ***This should be done before trying to replace the sunroof motors.***
08-313-26 REV. A2026-08-19. Service bulletin. Front Windows Auto-Reverse During Closing Customers may experience the following: SYMPTOM: ● Front windows travel to the closed position but then auto-reverses. This bulletin involves inspecting the date codes on both front power window regulator motors and, if necessary, replacing one or both power window regulator motors
08-313-262026-08-19. Service bulletin. Front Windows Auto-Reverse During Closing Customers may experience the following: SYMPTOM: ● Front windows travel to the closed position but then auto-reverses. This bulletin involves inspecting the date codes on both front power window regulator motors and, if necessary, replacing one or both power window regulator motors
9100855 Rev 12026-07-18. Service bulletin. 2 WAY LUMBAR SWITCH If the Driver Seat Lumbar Support is inoperative, stuck, or not responding as expected, obtain the following information from the customer prior to replacing the lumbar switch: 1.Which lumbar function is not operating properly? -Inflate (Extend) -Deflate (Retract) -Both directions 2.Is the concern constant or intermittent? 3.If intermittent, how often does it occur? -Daily -Weekly -Randomly 4.Is the lumbar support stuck in the extended or retracted position? -Extended -Retracted -Neither 5.Does the lumbar support respond after pressing the switch multiple times? -Yes / No 6.Does the concern occur only while driving, only at key-on, or while the vehicle is parked? 7.Has the concern occurred after the vehicle has been sitting for an extended period (overnight or several hours)? -Yes / No 8.Is the lumbar switch physically sticking or binding in either direction? -Yes / No 9.Has the lumbar switch, seat assembly, or lumbar support assembly been previously repaired or replaced? -Yes / No Before replacing the lumbar switch, verify proper power and ground, connector engagement, wiring integrity, and inspect for damaged harnesses, disconnected components, or signs of physical damage/abuse. If no external issues are identified, verify lumbar motor operation and related circuits prior to replacing the lumbar switch.
91008532026-07-18. Service bulletin. SWITCH Power Window 25-26 DJ and D2. Driver door mirror switches are sticking down. This is being caused by excess trim panel material extending into the switch opening which puts pressure on the switch bezel. Material needs to be removed from the opening. Reference SOL S2523000066.
1130692026-07-08. Service bulletin. SWITCH – HEADLAMP
1130702026-07-08. Service bulletin. SWITCH – HEADLAMP