Service bulletin 112634
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 11033884 |
| Published by NHTSA | 2026-06-16 |
| Manufacturer's number | 112634 |
| Manufacturer's date | 2026-06-03 |
| NHTSA component | STRUCTURE:BODY |
NHTSA's summary
HANDLE - DOOR PULL and PANEL - FRONT DOOR TRIM
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Body and frame
| RAM 1500 | 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2022699 | 2022-12-08. Structure |
|---|---|
| 22V904000 | 2022-12-08. STRUCTURE:BODY:TAILGATE:HINGE AND ATTACHMENTS |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 23-048-26 REV. A | 2026-10-07. Service bulletin. Multi-function Tailgate Requires High Closing Effort Customers may comment on the following: SYMPTOM: ● Difficulty closing the right-hand Multi-Function Tailgate due to high closing effort. This bulletin involves inspecting and possibly adjusting the Multi-Function tailgate. |
|---|---|
| 23-048-26 | 2026-09-30. Service bulletin. Not applicable to vehicles built for US market. Multi-function Tailgate Requires High Closing Effort Customers may comment on the following: SYMPTOM: ● Difficulty closing the right-hand Multi-Function Tailgate due to high closing effort. This bulletin involves inspecting and possibly adjusting the Multi-function tailgate. |
| 9100892 | 2026-09-10. Service bulletin. Switch - Tailgate Handle Prior to replacing the Tailgate Handle Switch, please review MasterTech Article - Tailgate Handle Inoperative. |
| 9100886 | 2026-09-03. Service bulletin. Sunroof Assy Sunroof glass and/or sunshade cannot open/close (inoperative). 1. Please follow the service procedure: 08-Electrical/8N - Power Systems/ Power Top, Sunroof/ Diagnosis and Testing. 2. If sunroof motors continue to be inoperative, please contact STAR and reference SET 1599. ***This should be done before trying to replace the sunroof motors.*** |
| 113855 | 2026-08-26. Service bulletin. SWITCH AND BEZEL - FRONT DOOR |
| 113854 | 2026-08-26. Service bulletin. SWITCH AND BEZEL - FRONT DOOR |
| 08-313-26 REV. A | 2026-08-19. Service bulletin. Front Windows Auto-Reverse During Closing Customers may experience the following: SYMPTOM: ● Front windows travel to the closed position but then auto-reverses. This bulletin involves inspecting the date codes on both front power window regulator motors and, if necessary, replacing one or both power window regulator motors |
| 08-313-26 | 2026-08-19. Service bulletin. Front Windows Auto-Reverse During Closing Customers may experience the following: SYMPTOM: ● Front windows travel to the closed position but then auto-reverses. This bulletin involves inspecting the date codes on both front power window regulator motors and, if necessary, replacing one or both power window regulator motors |
| S2608000033 | 2026-07-23. Service bulletin. Cluster Message “To Operate Tailgate Shift to Park” Vehicle is In Park |
| 9100855 Rev 1 | 2026-07-18. Service bulletin. 2 WAY LUMBAR SWITCH If the Driver Seat Lumbar Support is inoperative, stuck, or not responding as expected, obtain the following information from the customer prior to replacing the lumbar switch: 1.Which lumbar function is not operating properly? -Inflate (Extend) -Deflate (Retract) -Both directions 2.Is the concern constant or intermittent? 3.If intermittent, how often does it occur? -Daily -Weekly -Randomly 4.Is the lumbar support stuck in the extended or retracted position? -Extended -Retracted -Neither 5.Does the lumbar support respond after pressing the switch multiple times? -Yes / No 6.Does the concern occur only while driving, only at key-on, or while the vehicle is parked? 7.Has the concern occurred after the vehicle has been sitting for an extended period (overnight or several hours)? -Yes / No 8.Is the lumbar switch physically sticking or binding in either direction? -Yes / No 9.Has the lumbar switch, seat assembly, or lumbar support assembly been previously repaired or replaced? -Yes / No Before replacing the lumbar switch, verify proper power and ground, connector engagement, wiring integrity, and inspect for damaged harnesses, disconnected components, or signs of physical damage/abuse. If no external issues are identified, verify lumbar motor operation and related circuits prior to replacing the lumbar switch. |