# Service bulletin LI54.65\-P\-080529

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11031862
- Published by NHTSA: 2026\-05\-01
- Manufacturer's number: LI54.65\-P\-080529
- Manufacturer's date: 2026\-04\-29
- NHTSA component: VISIBILITY/WIPER

## NHTSA's summary

Complaint Frequent rear view camera flap actuations and/or noise associated. NOTE: Rear view camera functions are NOT affected and still perform in accordance with regulatory requirements. Cause Calibration of the reversing camera is in progress. This is not a malfunction, but an intended system behavior. Remedy An optimization has been implemented to reduce the quantity of rearview camera flap actuations for calibration. Open a TIPS case requesting addition of the "254 Rearview Camera Noise Optimization" option code. Once the code has been added, update and SCN code PARK \(N62/\*\) control unit. Prior to releasing the vehicle, please verify the following: • Rear camera flap when calibrating after a key cycle bus sleep will stay open to 29 MPH and then close. Will reopen, when calibrating, at 9 MPH.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2026/MC-11031862-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2026/MC-11031862-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Glass, wipers and mirrors, Wipers and washers

## Vehicles listed

- 2023 to 2024 MERCEDES\-BENZ AMG GLC43
- 2024 to 2026 MERCEDES\-BENZ AMG GLC43 4MATIC
- 2023 to 2026 MERCEDES\-BENZ GLC 300
- 2023 to 2026 MERCEDES\-BENZ GLC 300 4MATIC
- 2025 to 2026 MERCEDES\-BENZ GLC 350 E 4MATIC

JSON: [/v1/bulletins/11031862](/v1/bulletins/11031862)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20LI54.65-P-080529&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11031862&vehicle=Service%20bulletin%20LI54.65-P-080529)