WenmarOpen by Wenmar Pro

Over-the-air update SYNC-26.2.0.16.1 Transit

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeOver-the-air update
NHTSA id11031384
Published by NHTSA2026-04-17
Manufacturer's numberSYNC-26.2.0.16.1 Transit
Manufacturer's date2026-04-01
Campaign id or software versionSYNC-26.2.0.16.1
NHTSA componentELECTRICAL SYSTEM; UNKNOWN OR OTHER

NHTSA's summary

Quality improvements include: -Resolves SiriusXM disk memory usage

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Vehicles listed
FORD TRANSIT2022

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
25V3390002025-05-23. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
22V7910002022-10-20. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
22V4150002022-06-10. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
SSM 550312026-07-28. Service bulletin. Some 2021-2026 Ford/Lincoln vehicles may exhibit various symptoms including but not limited to the auto start/stop system not operating as intended with a "Check Charging System" message in the instrument panel cluster (IPC) while the charging system is operating properly with no charging related diagnostic trouble codes (DTC) stored. This may be due to someone using an aftermarket programmer to change the body control module (BCM) configuration to disable the auto start/stop system or perform other unsupported programming modifications. To correct this condition on F-150 and Bronco vehicles, download and run the Ford Diagnosis and Repair System (FDRS) application titled "BCM-Charging System Configuration Correction". Running this application will determine if the BCM configuration was modified by the customer and if so, provide the option to return the configuration back to factory settings. For other vehicle models exhibiting concerns related to unsupported aftermarket BCM programming, submit a Technical Support Request (TSR) requesting support to revert the BCM configuration
TSB 26-21672026-04-22. Service bulletin. This article supersedes TSB 25-2385. Reason for update: update the TSB Issue indicating the modules where are stored the DTCs P1A10 and P0AA6. Some of the vehicles listed in the Model statement above exhibit at least one of the following conditions: Illuminated malfunction indicator lamp (MIL) and/or illuminated powertrain malfunction (wrench) indicator with DTCs P0711, P0A2B, P0A2D, P0A2C, P0712, P0713 and P1A10 stored in the secondary on-board diagnostic module C (SOBDMC) DTC P0AA6 stored in the battery energy control module (BECM) and/or instrument panel cluster (IPC) Equipped with early design vent assembly attached to rear electric drive assembly. Refer to Figure 1.
SSM 547202026-04-10. Service bulletin. Various 2020-2026 Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
SSM 545892026-03-04. Other. Some 2019-2024 Ford and Lincoln vehicles equipped with SYNC3 may experience various connectivity concerns with The Ford App Lincoln App including but not limited to: missing activation prompt pop-upon the vehicle's center display screen when attempting to activate vehicle through The Ford App Lincoln App, incorrect location global positioning system GPS reported through The Ford App Lincoln App, problems with remote commands being performed through The Ford App Lincoln App and or incorrect data information reported on The Ford App Lincoln App. These symptoms will be accompanied by diagnostic trouble code DTC B156D 89 in the TCU. This may be due to the accessory protocol interface module APIM software. To correct the condition, update the APIM software.
SYNC-25.1.9.7.1 Transit2026-03-04. Over-the-air update. -25S49 Recall Remedy: -Infotainment software update to address frozen screens
SYNC-25.1.7.10.1 Transit2026-03-04. Over-the-air update. 25S49 Recall Remedy: -Infotainment software update to address frozen screens
SSM 546012026-02-27. Service bulletin. Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
SSM 543132025-10-28. Service bulletin. Some 2020-2025 various Ford and Lincoln vehicles equipped with blind spot information system (BLIS) may experience an inoperative blind spot monitoring with a "Blind Spot System Fault" message displayed in the instrument panel cluster (IPC). This may also be accompanied by diagnostic trouble codes (DTCs) B118C:11 and/or B118C:15 stored in the driver door module (DDM), and/or B118D:11 and/or B118D:15 stored in the passenger door module (PDM). This may be due to the wiring connector from the mirror to the BLIS module. If diagnostics lead to an internal mirror wiring harness fault, a new lower level BLIS light pigtail is now released for service. It is not necessary to replace the exterior mirror assembly. Use part number SC3Z-14A411-B to resolve the concern.
SYNC-25.2.0.16 Transit2025-10-03. Over-the-air update. 25S49 Recall Remedy: -Infotainment software update to address frozen screens
TSB 25-23852025-09-23. Service bulletin. Some of the vehicles listed in the Model statement above exhibit at least one of the following conditions: Illuminated malfunction indicator lamp (MIL) and/or illuminated powertrain malfunction (wrench) indicator with DTCs P0711, P0A2B, P0A2D, P0A2C, P0712, P0713 stored in the secondary on-board diagnostic module C (SOBDMC) DTCs P0AA6, P1A10 stored in the instrument panel cluster (IPC) Equipped with early design vent assembly attached to rear electric drive assembly (RDU). Refer to Figure 1.