# Service bulletin LI91.29\-P\-079178

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11031205
- Published by NHTSA: 2026\-04\-09
- Manufacturer's number: LI91.29\-P\-079178
- Manufacturer's date: 2026\-04\-08
- NHTSA component: SEATS

## NHTSA's summary

Complaint After opening the driver's door, the seat can no longer be moved using the Memory button. Adjustment via the seat adjustment switch is still possible. Example: Driver 1 parks the vehicle in the evening and the seat position is right to the front with Memory button 1. Driver 2 opens the driver's door and presses Memory button 2, as seat position 1 is too far forward to get in. The seat does not move to the saved rear seat position 2. Once the ignition is turned "on", the function is available again. Cause The cause is an error in the HU7 software. Remedy Please perform a software update in the HU7 control unit and then carry out a factory reset of the HU7.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2026/MC-11031205-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2026/MC-11031205-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Seats

## Vehicles listed

- 2024 MERCEDES\-BENZ AMG GLC43
- 2024 to 2026 MERCEDES\-BENZ AMG GLC43 4MATIC
- 2024 to 2025 MERCEDES\-BENZ AMG GLC43 4MATIC COUPE
- 2025 MERCEDES\-BENZ AMG GLC63 S E
- 2025 to 2026 MERCEDES\-BENZ AMG GLC63 S E 4MATIC\+
- 2025 to 2026 MERCEDES\-BENZ AMG GLC63 S E 4MATIC\+ COUPE
- 2023 to 2026 MERCEDES\-BENZ GLC 300
- 2023 to 2026 MERCEDES\-BENZ GLC 300 4MATIC
- 2024 to 2026 MERCEDES\-BENZ GLC 300 4MATIC COUPE
- 2024 MERCEDES\-BENZ GLC 300 COUPE
- 2025 to 2026 MERCEDES\-BENZ GLC 350 E 4MATIC
- 2026 MERCEDES\-BENZ GLC43 4MATIC COUPE

JSON: [/v1/bulletins/11031205](/v1/bulletins/11031205)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20LI91.29-P-079178&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11031205&vehicle=Service%20bulletin%20LI91.29-P-079178)