WenmarOpen by Wenmar Pro

Service bulletin LI54.71-P-080349

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11030292
Published by NHTSA2026-03-28
Manufacturer's numberLI54.71-P-080349
Manufacturer's date2026-03-25
NHTSA componentSTRUCTURE:BODY; ELECTRICAL SYSTEM

NHTSA's summary

Complaint Frequent rear view camera flap actuations and/or noise associated. NOTE: Rear view camera functions are NOT affected and still perform in accordance with regulatory requirements. Cause Calibration of the reversing camera is in progress. This is not a malfunction, but an intended system behavior. Remedy An optimization has been implemented to reduce the quantity of rearview camera flap actuations for calibration. This adjustment is not a warrantable event and should be performed at customer request only and at customers' expense. Open a TIPS case requesting addition of the "247 Rearview Camera Noise Optimization" option code. Once the code has been added, update both control units and perform an SCN coding: • A26/17 (Head Unit) • N62/* (PARK Control Unit) IMPORTANT: After both control units have been SCN coded, the "Movable 3D View" feature in the head unit will no longer be available. With this change there will be two distinct differences: 1) The "3D" icon when in the top down vehicle view, will no longer be present on the head unit. 2) The digital rendering of the vehicle with the ability to spatially move around the vehicle is no longer possible. This view is replaced with 2D static images of the left and right sides. Prior to releasing the vehicle, please verify the following: • Rear camera flap when calibrating after a key cycle bus sleep will stay open to 29 MPH and then close. Will reopen, when calibrating, at 9 MPH. • The head unit screens mentioned above appear the same as "View AFTER SCN Coding" as shown in the attachment.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame, Electrical system

Vehicles listed
MERCEDES-BENZ AMG GLA 352024 to 2025
MERCEDES-BENZ AMG GLA 35 4MATIC2024
MERCEDES-BENZ AMG GLA 35 4MATIC2026
MERCEDES-BENZ AMG GLB352024 to 2025
MERCEDES-BENZ AMG GLB35 4MATIC2026
MERCEDES-BENZ GLA 2502024 to 2026
MERCEDES-BENZ GLA 250 4MATIC2024
MERCEDES-BENZ GLA 250 4MATIC2026
MERCEDES-BENZ GLB 2502024 to 2026
MERCEDES-BENZ GLB 250 4MATIC2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.