WenmarOpen by Wenmar Pro

Service bulletin 08-123-26

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11030213
Published by NHTSA2026-03-25
Manufacturer's number08-123-26
Manufacturer's date2026-03-21
NHTSA componentELECTRICAL SYSTEM

NHTSA's summary

Instrument Panel Cluster (IPC) Heads Up Display (HUD) Failure The vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): SYMPTOM: ● B12B5-49 - Head Up Display Module-Internal Electronic Failure. Customers may experience the following: ● Audible ringing noise coming from the instrument panel around the HUD module area when on. s are to be made at this time. Once available, new PN 68613172AG will have the solution. A SW update is not available to the HUD module. POLICY: Information Only.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Trouble codes named

B12B5

Vehicles listed
JEEP GRAND WAGONEER2026
JEEP WAGONEER2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
08-374-262026-10-16. Service bulletin. R1H U43.17 Software Update - FOTA Customers may experience the following: SYMPTOM: ● CarPlay® application crash. ● Intermittent CarPlay® connection or extended connection time. ● Apple CarPlay® radio lagging, freezing or display glitches. ● Audio intermittently cuts out. ● Radio display blank. ● Intermittent Android Auto® / CarPlay® reconnection concern. ● Abnormal radio screen display when adjusting audio volume using the steering wheel controls after extended Bluetooth audio playback from an Android device. ● Unable to add or pair a device to the Head Unit (HU) while the vehicle is in motion. ● Bluetooth-enabled devices cannot be discovered when attempting to pair a phone, even when the device is inside the vehicle. ● Turn Signal Activated Blind Spot View activates slower when the left turn signal is used compared to the right turn signal. ● Android Auto® launches automatically with a blank screen. ● Radio display goes blank while audio continues to play, and radio functions become inoperative. ● Vehicle Settings page becomes unresponsive or frozen. ● Android Auto® fails to connect. ● FamCAM softkey requires multiple presses before launching. ● Radio resets or reboots while driving. ● Flashing odometer. ● Selectable Tire Fill Assist application displays an illegible "Save as Preset" softkey. ● Surround View Camera (SVC) guidelines remain displayed after the guidelines setting has been turned OFF through the radio. In addition, the following software enhancement is included: ● Improved Wi-Fi connectivity performance.
08-374-262026-10-16. Service bulletin. R1H U43.17 Software Update - FOTA Customers may experience the following: SYMPTOM: ● CarPlay® application crash. ● Intermittent CarPlay® connection or extended connection time. ● Apple CarPlay® radio lagging, freezing or display glitches. ● Audio intermittently cuts out. ● Radio display blank. ● Intermittent Android Auto® / CarPlay® reconnection concern. ● Abnormal radio screen display when adjusting audio volume using the steering wheel controls after extended Bluetooth audio playback from an Android device. ● Unable to add or pair a device to the Head Unit (HU) while the vehicle is in motion. ● Bluetooth-enabled devices cannot be discovered when attempting to pair a phone, even when the device is inside the vehicle. ● Turn Signal Activated Blind Spot View activates slower when the left turn signal is used compared to the right turn signal. ● Android Auto® launches automatically with a blank screen. ● Radio display goes blank while audio continues to play, and radio functions become inoperative. ● Vehicle Settings page becomes unresponsive or frozen. ● Android Auto® fails to connect. ● FamCAM softkey requires multiple presses before launching. ● Radio resets or reboots while driving. ● Flashing odometer. ● Selectable Tire Fill Assist application displays an illegible "Save as Preset" softkey. ● Surround View Camera (SVC) guidelines remain displayed after the guidelines setting has been turned OFF through the radio. In addition, the following software enhancement is included: ● Improved Wi-Fi connectivity performance.
91009262026-10-07. Service bulletin. WIRELESS CHARGER Welcome GREEN LED not turning ON after multiple IGN ON/OFF without sleep cycle and no phone on the charging pads. Part numbers affected: 68630089AA 68630088AB 68649038AA Welcome Green LED turns on for 1 second after multiple IGN ON/OFF without sleep cycle and no phone on the charging pad. Intent of this condition is to notify the customer/dealership that the Wireless Charging Pad is ready to charge. Do not report as warranty claim, no impact to wireless charger functionality. Part numbers affected: 68630089AB 68630088AD 68649038AB Advice to dealership: Do no replace wireless charger PNs 68630089AA,68630088AB,68649038AA if no Welcome GREEN LED is seen after multiple IGN ON/OFF without sleep cycle and no phone on the charging pads. This feature is available in the successor NIKs, no impact to wireless charger functionality.
08-341-262026-09-30. Service bulletin. Heads Up Display (HUD) Dimming Too Low Customers may experience one or more of the following: SYMPTOM: ● HUD is very dark and hardly viewable. ● HUD cannot be seen in daytime and very dim at night. This bulletin involves inspecting and possibly replacing the HUD module.
08-069-26 REV. B2026-09-23. Service bulletin. Flash: Power Liftgate Module (PLGM) Updates Customers may experience one or more of the following symptoms: SYMPTOM: ● **Continuous chime is heard in the trunk area and does not stop with closing the liftgate, ignition shut off or CAN bus going to sleep. ● Vehicle may not start because the battery has become depleted due to: ○ Noise on the CAN bus. ○ Liftgate left open for more than few hours. ○ Continuous chime. ● Power Liftgate is not responding when first attempting to open after vehicle has sat for an extended period of time. ● Customer is unable to open the liftgate.** ● Power Liftgate does not open using the front interior switch, key fob, Hands Free Entry (HFE) kick or exterior handle. The Instrument Panel Cluster (IPC) may display "Liftgate Open", a warning light may illuminate even though the liftgate appears fully closed, and an audible chime may be generated at speeds above 8 kph (5 mph). ● The power liftgate system chimes when trying to operate the liftgate using a HFE kick while no key is detected in the zone. ● After enabling or disabling the HFE kick or the Power Liftgate Alert feature, the PLGM does not save the changes. ● The power liftgate latch releases after pressing the exterior handle switch, but the liftgate does not power open. This bulletin involves inspecting and possibly reprogramming the PLGM with the latest available software.
OTHERDOC_1832026-09-17. Other. Radio Over The Air Update to U43.17 R1H Software Version (FOTA) Customers may experience one or more of the following: - Navigation Stability - Android Auto & Carplay stability & connectivity - Power management app - Distorted/glitchy display prior to start‑up animation - Text appearance display - Widget incorrect display - Turn signal blind spot response timing - Audio cut out - Drive Modes selection - Park assist Guidelines selction
S2623000052 REV. A2026-09-10. Service bulletin. Airbag Warning Light On or Intermittent. The Occupant Restraint Controller (ORC) May Have The Following DTCs (Active/Stored)
1142652026-09-03. Service bulletin. TRANSMITTER KIT & TRANSMITTER - INTEGRATED KEY FOB
1142682026-09-03. Service bulletin. TRANSMITTER KIT & TRANSMITTER - INTEGRATED KEY FOB
9100861 Rev 42026-08-26. Service bulletin. PUMP, Auxiliary Coolant, High Temperature Before replacing the High Temperature Auxiliary Coolant Pump, please perform the following steps: 1) Key ON/OFF and let the after-run pump run for at least 20 minutes before moving on to step #2. 2) Inspect the pump connector area for presence of water. 3) Inspect the pump connector for corrosion. 4) Inspect the pump for coolant contamination as this can cause the pump to stall. 5) Inspect battery terminals for damage to rule out a battery drainage issue. 6) Ensure the PCM is up-to-date with the latest available flash.