# Service bulletin LI54.71\-P\-080180

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11029058
- Published by NHTSA: 2026\-02\-27
- Manufacturer's number: LI54.71\-P\-080180
- Manufacturer's date: 2026\-02\-20
- NHTSA component: STRUCTURE:BODY

## NHTSA's summary

Complaint Frequent rear view camera flap actuations and/or noise associated. NOTE: Rear view camera functions are NOT affected and still perform in accordance with regulatory requirements. This is only for customer satisfaction purposes. Cause This is not a malfunction, but an intended system behavior. Calibration of the reversing camera is in progress. Remedy For customer satisfaction purposes, an optimization has been implemented to reduce the quantity of rearview camera flap actuations for calibration. Update both control units and perform on SCN coding: • A26/17 \(Head Unit\) • N62/\* \(PARK Control Unit\) IMPORTANT: After both control units have been SCN coded, the "Movable 3D View" feature in the head unit will no longer be available. With this change there will be two distinct differences: 1\) The "3D" icon when in the top down vehicle view, will no longer be present on the head unit. 2\) The digital rendering of the vehicle with the ability to spatially move around the vehicle is no longer possible. This view is replaced with 2D static images of the left and right sides. Prior to releasing the vehicle, please verify the following: • Rear camera flap when calibrating after a key cycle bus sleep will stay open to 29 MPH and then close. Will reopen, when calibrating, at 9 MPH. • The head unit screens mentioned above appear the same as "View AFTER SCN Coding" as shown in the attachment.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2026/MC-11029058-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2026/MC-11029058-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame

## Vehicles listed

- 2024 to 2025 MERCEDES\-BENZ AMG GLE53 4MATIC\+
- 2025 MERCEDES\-BENZ AMG GLE53 4MATIC\+ COUPE
- 2024 MERCEDES\-BENZ AMG GLE63
- 2024 MERCEDES\-BENZ AMG GLE63 S 4MATIC\+
- 2025 MERCEDES\-BENZ AMG GLE63 S 4MATIC\+ COUPE
- 2024 MERCEDES\-BENZ GLE 350
- 2024 to 2026 MERCEDES\-BENZ GLE 350 4MATIC
- 2024 MERCEDES\-BENZ GLE 450
- 2025 to 2026 MERCEDES\-BENZ GLE 450 4MATIC
- 2025 MERCEDES\-BENZ GLE 450 4MATIC COUPE
- 2024 to 2025 MERCEDES\-BENZ GLE 450E 4MATIC
- 2024 to 2025 MERCEDES\-BENZ GLE 580 4MATIC

JSON: [/v1/bulletins/11029058](/v1/bulletins/11029058)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20LI54.71-P-080180&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11029058&vehicle=Service%20bulletin%20LI54.71-P-080180)