WenmarOpen by Wenmar Pro

Service campaign 26-01-017G TSB

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService campaign
NHTSA id11028971
Published by NHTSA2026-02-24
Manufacturer's number26-01-017G TSB
Manufacturer's date2026-02-18
Campaign id or software versionL03G
NHTSA componentELECTRICAL SYSTEM

NHTSA's summary

Certain GV70 (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Vehicles listed
GENESIS GV702026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
26V0190002026-01-16. ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
26-01-077G TSB2026-10-09. Warranty extension. Certain GV70 Electrified (JK1A EV) and G80 Electrified (RG3 EV) vehicles may display a false warning light with Diagnostic Trouble Codes (DTC) U151A8C and/or U151B8C when vehicle is placed into “Ready” mode. This bulletin provides the procedure for updating the Vehicle Control Unit (VCU) software to address this condition.
26-01-017G-1 TSB2026-08-11. Warranty extension. Certain GV70 (JK1A) vehicles may exhibit a Data Connectivity Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
26-01-018G-1 TSB2026-08-11. Warranty extension. Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Connectivity Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
L03A L04G DCS2026-08-11. Warranty extension. Certain 2026MY GV70 (JK1A) and 2026MY GV70 Electrified (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletins (TSBs) 26-01-017G-1 26-01-018G-1 provide instructions to perform a software update for the DCU module. Over-the-Air (OTA): This update can also be conducted via OTA. Guests cancomplete on their own if they have an active subscription to Genesis Connected Services. A visit to retailers is not required if the update is conducted via OTA.
26-GI-002G TSB2026-06-06. Service bulletin. This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
26-01-035G DCS2026-04-15. Service campaign. Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizon's communication network. Technical Service Bulletin (TSB) 26-01-035G provides instructions to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
26-01-035G TSB2026-04-15. Service campaign. Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services (CCS) functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to verify Connected Car Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
26-01-018G DCS2026-02-24. Service campaign. Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletin (TSB) 26-01-018G provides instructions to perform the software update for the DCU module.
26-01-018G TSB2026-02-24. Service campaign. Certain GV70 Electrified (JK1A EV) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
26-01-017G DCS2026-02-24. Service campaign. Certain GV70 (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. Technical Service Bulletin (TSB) 26-01-017G provides instructions to perform the software update for the DCU module.