WenmarOpen by Wenmar Pro

Service bulletin 18-015-26

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11028768
Published by NHTSA2026-02-12
Manufacturer's number18-015-26
Manufacturer's date2026-02-04
NHTSA componentELECTRICAL SYSTEM; ENGINE

NHTSA's summary

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): lP0300-00 - Multiple Cylinder Misfire - in Active or Stored status set during cold start catalyst heating. lP0301-00 - Cylinder 1 Misfire - in Active or Stored status set during cold start catalyst heating. lP0302-00 - Cylinder 2 Misfire - in Active or Stored status set during cold start catalyst heating. lP0303-00 - Cylinder 3 Misfire - in Active or Stored status set during cold start catalyst heating. lP0304-00 - Cylinder 4 Misfire - in Active or Stored status set during cold start catalyst heating. lP0305-00 - Cylinder 5 Misfire - in Active or Stored status set during cold start catalyst heating. lP0306-00 - Cylinder 6 Misfire - in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: lVehicle has a rough idle. lEngine has a miss. lNoisy valvetrain. This bulletin involves reprogramming the PCM with the latest available software.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Engine

Vehicles listed
RAM 15002024

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
25V2980002025-05-08. AIR BAGS; ELECTRICAL SYSTEM:WIRING

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
18-015-26 REV. A2026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0300-00 - Multiple Cylinder Misfire - in Active or Stored status set during cold start catalyst heating. ● P0301-00 - Cylinder 1 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0302-00 - Cylinder 2 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0303-00 - Cylinder 3 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0304-00 - Cylinder 4 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0305-00 - Cylinder 5 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0306-00 - Cylinder 6 Misfire - in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves inspecting the vehicle and, if required, reprogramming the PCM with the latest available software.
18-015-26 REV. A2026-10-16. Service bulletin. Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0300-00 - Multiple Cylinder Misfire - in Active or Stored status set during cold start catalyst heating. ● P0301-00 - Cylinder 1 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0302-00 - Cylinder 2 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0303-00 - Cylinder 3 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0304-00 - Cylinder 4 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0305-00 - Cylinder 5 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0306-00 - Cylinder 6 Misfire - in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves inspecting the vehicle and, if required, reprogramming the PCM with the latest available software.
S2609000006 REV.A2026-10-07. Service bulletin. Customer indicates Malfunction Indicator Light (MIL) or Check Engine Light (CEL) coming on.
91008982026-09-17. Service bulletin. Engine PNs: MY 24-26 WD/DT (5.7L) Code P00B is being misdiagnosed and incorrect parts are being installed causing over repair. Refer to SOL S2609000006 The IAFM Foam Engine Valley Cover (PN 53013735AB) does not provide sufficient clearance for proper routing of the MDS solenoid jumper harness (PN 05148163AE). As a result, the harness may become compressed by the foam cover. To prevent unnecessary part replacement, the MDS solenoid jumper harness (PN 05148163AE) should be inspected for damage or pinch conditions prior to replacing the following part numbers: Engine PNs: 68409343AA 68409357AA 68450915AA OCV PNs: 53022338AB Phaser PNs: 53022298AA 53022298AB
1138552026-08-26. Service bulletin. SWITCH AND BEZEL - FRONT DOOR
1138542026-08-26. Service bulletin. SWITCH AND BEZEL - FRONT DOOR
1140722026-08-26. Service bulletin. MOTOR - WINDOW REGULATOR
1140732026-08-26. Service bulletin. MOTOR - WINDOW REGULATOR
08-291-262026-07-29. Service bulletin. R1H UBQ/UEQ Intermittent HVAC Page Lockup Customers may experience one or more of the following: SYMPTOM: ● Intermittently the HVAC page on the Display Screen Module will change temperature and blower speed and then freeze. ● When on the HVAC page, the Display Screen Module may not respond to touch. All other pages operate as intended.
08-288-262026-07-29. Service bulletin. Radio Does Not Display Selected Drive Mode Customers may experience the following: SYMPTOM: ● Drive Mode setting reverts back to "Auto" on Display Screen Module while the Instrument Panel Cluster (IPC) shows the Drive Mode that has been requested.