# Service bulletin ITB25\-014

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11028679
- Published by NHTSA: 2026\-02\-10
- Manufacturer's number: ITB25\-014
- Manufacturer's date: 2026\-01\-07
- NHTSA component: FUEL/PROPULSION SYSTEM

## NHTSA's summary

VENT CONTROL VALVE IN ACTIVE TEST INOPERATIVE IN CONSULT 4 SERVICE INFORMATION An issue in CONSULT 4 has been identified in “EVAP system close” in Work support. · After selecting the "EVAP system close" in Work support, the “VENT CONTROL/V” in Active test becomes non\-functional temporarily. · When selecting “EVAP system close” operation in Work support, wait 10 minutes before starting “VENT CONTROL/V” Active test or cycle the IGN switch ON/OFF for “VENT CONTROL/V” Active test to be operational. HINT: This bulletin applies to model years that use CONSULT 4 only.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2026/MC-11028679-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2026/MC-11028679-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Fuel system

## Vehicles listed

- 2025 to 2026 INFINITI QX60
- 2025 to 2026 INFINITI QX80

## Other bulletins for the same vehicles and component

- [ITB26\-002A](/bulletins/11033023.md), 2026-05-30, Service bulletin: FUEL/PROPULSION SYSTEM. FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM This bulletin is no longer active. Please discard previous versions of ITB26\-002.
- [ITB26\-002](/bulletins/11028682.md), 2026-02-10, Service bulletin: FUEL/PROPULSION SYSTEM. FUEL FILLER TUBE LOWER SEAL IS LEAKING AND DTC P0456 IS STORED IN THE ECM IF YOU CONFIRM The vehicle has a visible leak with a smoke machine test coming from the fuel filler tube lower seal, AND DTC P0456 is stored as “Active”, “Past”, or “Pending” in the ECM. ACTION 1. Remove the supplied funnel from the rear of the vehicle or trunk. 2. Insert the funnel completely in the fuel filler tube and remove completely five \(5\) times. 3. Re\-check the fuel filler tube lower seal with a smoke machine to determine visually if any leak is present. 4. If the fuel filler lower seal continues to leak, replace the fuel filler tube. IMPORTANT: The purpose of ACTION \(above\) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.

JSON: [/v1/bulletins/11028679](/v1/bulletins/11028679)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20ITB25-014&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11028679&vehicle=Service%20bulletin%20ITB25-014)