# Service bulletin A07\-078

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11028517
- Published by NHTSA: 2026\-02\-06
- Manufacturer's number: A07\-078
- Manufacturer's date: 2026\-01\-27
- NHTSA component: SUSPENSION

## NHTSA's summary

Service Bulletin \- There is a pop or clunk from the front suspension area when driving over bumps. This usually occurs after completing a tight \(full lock\) turn.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2026/MC-11028517-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2026/MC-11028517-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Suspension

## Vehicles listed

- 2006 to 2011 HONDA CIVIC
- 2011 HONDA CIVIC SI

## Other bulletins for the same vehicles and component

- [Service Bulletin](/bulletins/10129527.md), 2018-03-05, Service bulletin: SUSPENSION. Service bulletin \- The rear suspension geometry \(camber\) on some models may cause uneven or rapid rear tire wear. This wear may appear as diagonal lines or inner edge tread wear. Tires in an advanced stage of this diagonal or inner\-edge wear may vibrate at highway speeds and/or make a roaring noise that sounds like a bad bearing.
- [07\-078](/bulletins/10043607.md), 2012-04-14, Service bulletin: SUSPENSION:FRONT. HONDA: WHEN MAKE TIGHT TURN, WOULD HEAR OR FEEL A POPPING OR CLUNKING NOISE, AFTER DRIVING OVER BUMPS, COMING FROM THE FRONT SUSPENSION. \*PE
- [08\-001](/bulletins/10024687.md), 2008-05-06, Service bulletin: SUSPENSION:REAR. UNEVEN OR RAPID REAR TIRE WEAR. \*NJ
- [07043](/bulletins/10022467.md), 2007-08-15, Service bulletin: SUSPENSION:FRONT. POPPING NOISE IN THE FRONT SUSPENSION WHILE TURNING. \*KB

JSON: [/v1/bulletins/11028517](/v1/bulletins/11028517)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20A07-078&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11028517&vehicle=Service%20bulletin%20A07-078)