# Service bulletin SSM 54432

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11026620
- Published by NHTSA: 2025\-12\-16
- Manufacturer's number: SSM 54432
- Manufacturer's date: 2025\-12\-09
- NHTSA component: SUSPENSION; POWER TRAIN

## NHTSA's summary

Some 2025\-2026 Transit vehicles equipped with rear\-wheel\-drive \(RWD\), single rear wheel only, may experience a boom/hum/moan noise from the rear while driving. This noise is most noticeable at highway speeds between 70 and 90 mph \(112\-144 km/h\). This may be due to a harmonic vibration. The Workshop Manual \(WSM\), Section 205\-01 \> Diagnosis and Testing \> Driveshaft \> Symptom Chart NVH \> Rumble or Boom has been updated to include diagnostic and repair direction for this concern.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11026620-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11026620-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Suspension, Transmission and driveline

## Vehicles listed

- 2025 FORD TRANSIT

## Other bulletins for the same vehicles and component

- [TSB 26\-2263](/bulletins/11033575.md), 2026-06-05, Service bulletin: POWER TRAIN. This bulletin supersedes 26\-2112. Reason For Update: add 2026 model year vehicles, update LV fluid XT\-10\-QLVC and CXT\-10\-LV6 description to add "Transfer Case Fluid 4WD Only", and update Step 4 to inspect/replace 7H351 and 7B177 outside of this article. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \- No upshift past second gear \- Unable to achieve third gear ratio \- Illuminated MIL with DTCs P0757 and P2701 This may be due to a damaged one\-way clutch \(OWC\).
- [25N12](/bulletins/11031778.md), 2026-04-30, Other: POWER TRAIN. Customer Satisfaction Program 25N12 Certain 2020\-2025 Model Year Transit All\-Wheel\-Drive \(AWD\) Vehicles Transfer Case Replacement If Required After Dealer Evaluation
- [SSM 54738](/bulletins/11031302.md), 2026-04-14, Service bulletin: ENGINE; POWER TRAIN. Some 2023\-2025 Escape 1.5L/F\-Super Duty/Transit vehicles may exhibit a lack of cooling from the heating, ventilation, and air conditioning \(HVAC\) system, which may be accompanied by abnormal rattling, grinding and/or squealing noises from the engine compartment. This may be due to damage to the air conditioning \(A/C\) compressor internal components and/or clutch assembly. Confirm ambient air temperature is above approximately 0°C \(32.0°F\). On the HVAC controls, set the temperature to full cold \(not MAX A/C\), select PANEL, set the fan speed to the highest setting and select the A/C button \(indicator on\). If the A/C compressor clutch engages and the A/C compressor is noisy, and/or the belt is slipping on the A/C compressor pulley or the A/C compressor is seized, install a new A/C compressor as indicated in Section 412\-00 of the Workshop Manual \(WSM\). For claiming, use causal part 19703 and labor operation MT19700SSM up to 0.3 hours to check for a damaged compressor. If the compressor requires replacement, claim labor operations 19700A and 19700A4. Also claim available Service Labor Time Standards \(SLTS\) op
- [SSM 54719](/bulletins/11031262.md), 2026-04-10, Service bulletin: POWER TRAIN. For 20212026 vehicles equipped with the 10R80 transmission, a new Transmission Clutch Circuit Leak Test has been introduced in the Ford Diagnosis and Repair System \(FDRS\). This test utilizes the pressure and vacuum transducer \(PVT\) when available. When referred to a specific clutch \(A\-F\) test by a pinpoint test in Workshop Manual \(WSM\), Section 307\-01 \> Diagnosis and Testing, the Clutch Assembly tests have been updated with a hyperlink to the new Transmission Line Pressure Test \- Pressure Vacuum Transducer \(PVT\) Is Available procedure in WSM, Section 307\-01 \> General Procedures. This procedure provides instructions to perform the FDRS Transmission Clutch Circuit Leak Test when applicable. The new test improves the accuracy of detecting leaks within transmission fluid circuits and replaces the previous air check method. The previous air check procedure has been shown to produce a high rate of false positives, which may lead to unnecessary repairs when no actual leak is present. Accordingly, the air check procedure is not to be used for diagnosing internal transmission hydraulic leaks or as justification
- [SSM 54674](/bulletins/11030791.md), 2026-04-06, Service bulletin: POWER TRAIN. For 2021\-2026 vehicles equipped with the 10R80 transmission, a new Transmission Clutch Circuit Leak Test has been introduced in the Ford Diagnosis and Repair System \(FDRS\). This test utilizes the pressure and vacuum transducer \(PVT\) when available. The Workshop Manual \(WSM\) has been updated under Section 307\-01 \> Diagnosis and Testing to include this procedure. The new test improves the accuracy of detecting leaks within transmission fluid circuits and replaces the previous air check method.
- [TSB 26\-2112](/bulletins/11030178.md), 2026-03-23, Service bulletin: FUEL/PROPULSION SYSTEM; UNKNOWN OR OTHER; POWER TRAIN. This bulletin supersedes TSB 26\-2059. Reason For Update: To add missing labor operations. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \- No upshift past second gear \- Unable to achieve third gear ratio \- Illuminated malfunction indicator lamp \(MIL\) with DTCs P0757 and P2701 This may be due to a damaged one\-way clutch \(OWC\).
- [TSB 26\-2059](/bulletins/11029552.md), 2026-03-04, Service bulletin: POWER TRAIN. This bulletin supersedes TSB 25\-2423. Reason For Update: Replace the incorrect acronym SOWC with the correct acronym OWC. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \- No upshift past second gear \- Unable to achieve third gear ratio \- Illuminated malfunction indicator lamp \(MIL\) with DTCs P0757 and P2701 This may be due to a damaged one\-way clutch \(OWC\).
- [SSM 54592](/bulletins/11029081.md), 2026-02-27, Service bulletin: POWER TRAIN. For 20172026 vehicles equipped with a 10R transmission, a revision to the Road Testing Vehicle procedure has been made in the WSM, located in Section 307\-01 \> Diagnosis and Testing. This updated procedure improves the diagnosis of customer reported transmission concerns and aids in locating the proper root cause. During diagnosis and testing, details regarding whether the condition is more prevalent when the vehicle is hot or cold, throttle percentage at the time of occurrence, vehicle speed, the specific shift involved, and whether the issue occurs during transmission engagements \(N\>R, N\>D, R\>D, or D\>R\) should be noted. Engineering requests including these detailed operating conditions that will significantly assist with root cause analysis. Diagnosis, testing, and repair should use established labor times outside this article.
- [SSM 54363](/bulletins/11025526.md), 2025-11-13, Service bulletin: UNKNOWN OR OTHER; POWER TRAIN; ENGINE. Some 2021\-2025 Expedition/Navigator/F\-150/F\-Super Duty/F\-53 Motorhome/F59 Commercial Stripped Chassis/F\-650/F\-750/Transit vehicles equipped with a 2.7L/3.5L \(non hybrid\)/6.8L/7.3L engine and 2021\-2026 E\-Series may exhibit a rattle/scraping noise from the bellhousing area on start\-up. Workshop Manual \(WSM\), Section 303\-00 Engine System \- General Information \> Diagnosis and Testing and 303\-06 \> Starting System has been updated to address this condition. Additionally, WSM, Section 303\-01 \> Removal and Installation \> Engine to Transmission Spacer Plate has been added to address this condition. Refer to the revised WSM sections for normal diagnosis.
- [TSB 25\-2423](/bulletins/11023547.md), 2025-10-02, Service bulletin: POWER TRAIN. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: \- No upshift past second gear \- Unable to achieve third gear ratio \- Illuminated malfunction indicator lamp \(MIL\) with DTCs P0757 and P2701 This may be due to a damaged one\-way clutch \(OWC\).

JSON: [/v1/bulletins/11026620](/v1/bulletins/11026620)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SSM%2054432&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11026620&vehicle=Service%20bulletin%20SSM%2054432)