WenmarOpen by Wenmar Pro

Service bulletin 2079175/3

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11026445
Published by NHTSA2025-12-06
Manufacturer's number2079175/3
Manufacturer's date2025-11-15
NHTSA componentELECTRICAL SYSTEM

NHTSA's summary

MIB3 Telecom Infotainment MMI becoming stuck on the 'initialisation/loading' screen | Bentayga Series | 23MY. Customer Statement: The customer complains of an issue with MMI becoming stuck on the 'initialisation/loading' screen.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system

Vehicles listed
BENTLEY BENTAYGA2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
25V8110002025-11-24. ELECTRICAL SYSTEM:PROPULSION SYSTEM:HYBRID MANAGEMENT:POWER CONTROL UNIT/MODULE (HPCU):SOFTWARE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
2061369/142026-09-09. Service bulletin. Engine Overheating - Warning in the DIP | V8 Kovomo. Customer statement / workshop findings: One or a combination of the following symptoms are evident • Engine overheat warning in the DIP (Engine overheating) • Unusual cooling fan operation at high temperatures • P19F700: Low engine coolant temperature indicator lamp coolant too warm • Signs of coolant in the vacuum hoses for switch valve N649
2061369/132026-09-05. Service bulletin. Engine Overheating - Warning in the DIP | V8 Kovomo. Customer statement / workshop findings: One or a combination of the following symptoms are evident: • Engine overheat warning in the DIP (Engine overheating) • Unusual cooling fan operation at high temperatures • P19F700: Low engine coolant temperature indicator lamp coolant too warm • Signs of coolant in the vacuum hoses for switch valve N649
2078373/42026-09-03. Service bulletin. Sunroof blind not retracting | Bentayga Series. Customer may report that the sunroof blind is stuck in the closed position and cannot be opened using interior controls. The Sunroof blind is stuck due to uneven/ruffled or crumped during open or closing
2081085/22026-08-06. Service bulletin. V8 Engine - Ticking Noise, Misfiring and Possible Low Oil Pressure Indications. Customer statement: The customer may report an audible ticking noise from the top of the engine, low oil pressure warnings / MIL on the Driver Information Panel, and/or misfiring during engine operation
2073377/42026-08-06. Service bulletin. TPMS - Warning within the Drivers Information Panel (DIP) - Tyre pressure sensor - Low battery.
2078373/32026-08-06. Service bulletin. Sunroof blind not retracting | Bentayga Series.
2082308/12026-08-06. Service bulletin. Satellite Values Not Displayed in MVBs - J949 Emergency Call Control Module (Conbox). Customer statement / workshop findings: During diagnosis using ODIS, Measured Value Blocks (MVBs) for: Visible satellites, tracked satellites (within J949 Emergency Call Control Module – Conbox) may display blank or no value. This condition may be interpreted as a GPS reception fault, antenna issue or connectivity malfunction. Diagnostic logs may also show absence of satellite values.
2051187/132026-08-05. Service bulletin. Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2059392/72026-08-05. Service bulletin. Bentayga - PDC system not working or PDC system false detection. Customer statement: • PDC system not working or PDC system false detection • Warning evident within the DIP
2080680/22026-08-04. Service bulletin. Organ stop air regulator jammed / broken / electrical value wrong reading. Customer Statement: Airflow from the organ stops (air regulators) is not functioning correctly; vents may be stuck, broken, or showing incorrect operation.