# Service bulletin 09\-041\-25

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11026098
- Published by NHTSA: 2025\-12\-04
- Manufacturer's number: 09\-041\-25
- Manufacturer's date: 2025\-11\-20
- NHTSA component: VISIBILITY/WIPER
- Manufacturer's system: Windshield

## NHTSA's summary

Some vehicles may exhibit a distortion in the front windshield causing a distorted view. This is caused by the distortion test process during manufacturing not being conducted correctly. To eliminate this concern, the distortion test process has been modified to perform it on all units during manufacturing.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11026098-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11026098-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Glass, wipers and mirrors, Wipers and washers

## Vehicles listed

- 2023 to 2025 MAZDA CX\-50

## Other bulletins for the same vehicles and component

- [SA\-043\-26](/bulletins/11035606.md), 2026-08-04, Service bulletin: VISIBILITY/WIPER. This SA supersedes the previously issued SA\(s\) listed below. The changes are noted in Red. SA\-063/24 09/06/24 DESCRIPTION The Blind Spot Monitoring \(BSM\) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction.
- [SA\-025\-25](/bulletins/11019160.md), 2025-06-05, Service bulletin: VISIBILITY/WIPER. Some vehicles may exhibit wiper blade contact with the A\-pillar trim, with or without a chattering noise. This condition may be caused by worn or contaminated wiper blades. It can also be caused by bent wiper arms, or loose wiper arm retaining nuts due to improper handling. Improper handling occurs when pulling on or forcing the wiper arms. Technicians should be aware that while replacement of the wiper blade may resolve some cases, correction of bent components or repositioning of the wiper arms, particularly when the retaining nut is loose, requires additional steps to ensure proper alignment and function.

JSON: [/v1/bulletins/11026098](/v1/bulletins/11026098)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2009-041-25&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11026098&vehicle=Service%20bulletin%2009-041-25)