# Service bulletin LI46.35\-P\-079817

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11023371
- Published by NHTSA: 2025\-09\-29
- Manufacturer's number: LI46.35\-P\-079817
- Manufacturer's date: 2025\-09\-26
- NHTSA component: SUSPENSION

## NHTSA's summary

Complaint Cracking noises are audible from the area of the electric steering gear with full steering movement \(i.e. when the wheel is turned to full lock\). Cause The vehicles have a function that electronically limits the steering movement. In isolated cases, e.g. following a toe adjustment, the steering limitations can be taught in incorrectly; this results in a metallic cracking noise occurring when turning the steering wheel to the point of full steering movement, due to the mechanical end stops being reached; see video. Remedy For the steering limitations in electrical power steering control unit N68, perform the procedure Reset value for 'straight\-ahead position of the steering wheel' with XENTRY in the "Adaptations" tab under "Teach\-in processes" and reteach in the steering limitations. Teach\-in process for the steering limitations: 1. Vehicle is stationary, engine is switched on 2. With XENTRY Diagnosis connected, open the "Actual values" menu in electrical power steering control unit N68 3. Turn the steering wheel all the way to the left to full lock and hold it there – then slowly press the steering wheel further to the left until the "Steering wheel torque" value \(observe actual values in XENTRY\) is approx. 10–15 Nm – the actual value "Left steering limitation "Partially learned"" is displayed 4. Bring the steering wheel into the center position 5. Turn the steering wheel all the way to the right to full lock and hold it there – then slowly press the steering wheel further to the right until the "Steering wheel torque" value \(observe actual values in XENTRY\) is approx. 10–15 Nm – the actual value "Right steering limitation "Partially learned"" is displayed 6. Bring the steering wheel into the center position – actual values of the steering limitations are displayed as "Fully learned" – see note\!

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11023371-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11023371-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Suspension

## Vehicles listed

- 2022 to 2024 MERCEDES\-BENZ AMG EQS
- 2022 to 2024 MERCEDES\-BENZ EQS 580
- 2022 to 2023 MERCEDES\-BENZ EQS 580 4MATIC
- 2023 to 2025 MERCEDES\-BENZ EQS SUV 580 4MATIC

JSON: [/v1/bulletins/11023371](/v1/bulletins/11023371)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20LI46.35-P-079817&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11023371&vehicle=Service%20bulletin%20LI46.35-P-079817)