WenmarOpen by Wenmar Pro

Service bulletin S2508000081

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11023175
Published by NHTSA2025-09-17
Manufacturer's numberS2508000081
Manufacturer's date2025-09-13
NHTSA componentFUEL/PROPULSION SYSTEM

NHTSA's summary

Water in Fuel (WIF) Warning Lamp on After Draining Fuel Filter Module

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Fuel system

Vehicles listed
RAM 25002025, 2026
RAM 35002025, 2026
RAM 45002025, 2026
RAM 55002025, 2026

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
1137832026-08-06. Service bulletin. MODULE & MODULE KIT - FUEL PUMP/LEVEL UNIT
9100833 REV12026-07-18. Service bulletin. Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
91008332026-07-02. Service bulletin. Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
1128672026-07-02. Service bulletin. INJECTOR - FUEL
1128692026-07-02. Service bulletin. INJECTOR - FUEL
S2508000109 REV.A2026-04-22. Service bulletin. Instrument Cluster Fuel and Coolant Temperature Gauge Do Not Reset To The Home Position And Show Incorrect Values
14-004-262026-04-22. Service bulletin. Water In Fuel (WIF) Indicator Light Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set the following Diagnostic Trouble Code (DTC): ● P2269-00 - Water In Fuel Condition. This bulletin involves draining the WIF separator and swapping the WIF sensor signal and ground terminals within the harness connector from their original positions.
S25080001092026-04-15. Service bulletin. Instrument Cluster Fuel and Coolant Temperature Gauge Do Not Reset To The Home Position And Show Incorrect Values
S2514000002 REV.A2026-04-10. Service bulletin. P2540 Diagnostic Trouble Code (DTC) and Longer Than Expected, Extended Crank Time After Fuel Level Run Too Low or After Fuel Filter/System Servicing
14-001-262026-03-18. Service bulletin. Fuel Leaking From Fuel Heater Harness Connector Customers may comment on the following: SYMPTOM: ● Fuel is leaking. This bulletin involves inspecting and possibly replacing the fuel heater.