# Over\-the\-air update 22\-PU1010\-MIL\-LT Bronco

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Over\-the\-air update
- NHTSA id: 11021365
- Published by NHTSA: 2025\-08\-04
- Manufacturer's number: 22\-PU1010\-MIL\-LT Bronco
- Manufacturer's date: 2025\-07\-01
- Campaign id or software version: 22\-PU1010\-MIL\-LT
- NHTSA component: ELECTRICAL SYSTEM
- Manufacturer's system: Electronic Brake Booster

## NHTSA's summary

Software Update: Quality improvements include: \-Addresses incorrectly triggered warning lights when doors are removed \-Addresses an erroneous DTC caused by the Electronic Brake Booster \(EBB\) in cold climate

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11021365-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11021365-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system

## Vehicles listed

- 2021 to 2022 FORD BRONCO

## Recalls for the same vehicles and component

- [2026356](/recalls/tc/2026356.md), 2026-07-20: Electrical
- [26V468000](/recalls/nhtsa/26V468000.md), 2026-07-20: ENGINE; ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD
- [2026005](/recalls/tc/2026005.md), 2026-01-09: Electrical
- [2025554](/recalls/tc/2025554.md), 2025-10-10: Electrical

## Other bulletins for the same vehicles and component

- [SSM 55240](/bulletins/11038445.md), 2026-10-13, Service bulletin: ELECTRICAL SYSTEM; UNKNOWN OR OTHER; SERVICE BRAKES. Some 2021\-2024 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code \(DTC\) C0049:01 stored in the anti\-lock brake system \(ABS\) module. This may be due to pin fitment at the brake fluid level sensor connector. To resolve this concern, replace the brake fluid reservoir and replace the brake fluid level sensor electrical connector C1052 with service pigtail wiring kit 3U2Z\-14S411\-BXAB. For claiming, use causal part 2L210 and labor operations 2140A and 2219D45WR.
- [TSB 26\-2380](/bulletins/11037537.md), 2026-09-29, Service bulletin: SUSPENSION; ELECTRICAL SYSTEM; STRUCTURE:BODY; UNKNOWN OR OTHER. This article supersedes TSB 25\-2575 to update the Parts list to add the applicable body wiring harnesses and underbody shield bolts. Some vehicles listed in the Model statement above may exhibit a "Sta\-bar Disconnect Service Required" message in the instrument panel cluster \(IPC\) with any of the following diagnostic trouble codes \(DTCs\) stored in the chassis control module \(CHCM\): C103A, C1A99, C1B03, C1B07, C1B14 and/or B1A67. This may be due to water intrusion in the stabilizer bar wiring harness connector.
- [PCM\-26.6.3 Bronco](/bulletins/11037511.md), 2026-09-28, Other: UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM. 25S75 Recall remedy \-Powertrain Control Module update to introduce logic to prevent low pressure fuel pump binding and maintain fuel flow to the engine.
- [PCM\-26.10.3 Bronco](/bulletins/11037417.md), 2026-09-21, Over\-the\-air update: POWER TRAIN; ELECTRICAL SYSTEM; FUEL/PROPULSION SYSTEM; UNKNOWN OR OTHER. 25S75 Recall remedy \-Powertrain Control Module update to introduce logic to prevent low pressure fuel pump binding and maintain fuel flow to the engine.
- [PCM\-26.2.11.4 Bronco](/bulletins/11037309.md), 2026-09-14, Over\-the\-air update: FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM; UNKNOWN OR OTHER. 25S75 Recall remedy \-Powertrain Control Module update to introduce logic to prevent low pressure fuel pump binding and maintain fuel flow to the engine.
- [PCM\-26.2.11.3 Bronco](/bulletins/11037308.md), 2026-09-14, Over\-the\-air update: ELECTRICAL SYSTEM; UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM. 25S75 Recall remedy \-Powertrain Control Module update to introduce logic to prevent low pressure fuel pump binding and maintain fuel flow to the engine.
- [PCM\-26.11.5 Bronco](/bulletins/11037307.md), 2026-09-14, Over\-the\-air update: UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM. 25S75 Recall remedy \-Powertrain Control Module update to introduce logic to prevent low pressure fuel pump binding and maintain fuel flow to the engine.
- [26E04](/bulletins/11035465.md), 2026-08-03, Emissions: UNKNOWN OR OTHER; ELECTRICAL SYSTEM. NEW VEHICLE DELIVERY HOLD \- Emissions Recall 26E04 Certain 2021\-2025 Model Year F\-150, Maverick, Mustang, Ranger, Expedition, Bronco Sport, Explorer, Bronco, Navigator, and Aviator Vehicles Powertrain Control Module Software Update
- [SSM 55031](/bulletins/11035269.md), 2026-07-28, Service bulletin: UNKNOWN OR OTHER; FUEL/PROPULSION SYSTEM; ELECTRICAL SYSTEM. Some 2021\-2026 Ford/Lincoln vehicles may exhibit various symptoms including but not limited to the auto start/stop system not operating as intended with a "Check Charging System" message in the instrument panel cluster \(IPC\) while the charging system is operating properly with no charging related diagnostic trouble codes \(DTC\) stored. This may be due to someone using an aftermarket programmer to change the body control module \(BCM\) configuration to disable the auto start/stop system or perform other unsupported programming modifications. To correct this condition on F\-150 and Bronco vehicles, download and run the Ford Diagnosis and Repair System \(FDRS\) application titled "BCM\-Charging System Configuration Correction". Running this application will determine if the BCM configuration was modified by the customer and if so, provide the option to return the configuration back to factory settings. For other vehicle models exhibiting concerns related to unsupported aftermarket BCM programming, submit a Technical Support Request \(TSR\) requesting support to revert the BCM configuration
- [SSM 55028](/bulletins/11035267.md), 2026-07-28, Service bulletin: ELECTRICAL SYSTEM; UNKNOWN OR OTHER. Some 2021\-2024 Ford and Lincoln vehicles may exhibit an "Updating SYNC" message on the vehicle center display screen after an over the air \(OTA\) update. The message can be cleared from the center display screen and SYNC can be used normally, but it will re\-appear at every subsequent ignition cycle. Inform customers that engineering is currently working on a software update solution for this condition to be delivered OTA expected in late Q3 2026. Software will update automatically if vehicle connectivity is enabled in the vehicles settings. Monitor Professional Technician System \(PTS\) for additional information.

JSON: [/v1/bulletins/11021365](/v1/bulletins/11021365)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Over-the-air%20update%2022-PU1010-MIL-LT%20Bronco&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11021365&vehicle=Over-the-air%20update%2022-PU1010-MIL-LT%20Bronco)