WenmarOpen by Wenmar Pro

Service bulletin LI33.20-P-078406

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11021108
Published by NHTSA2025-07-31
Manufacturer's numberLI33.20-P-078406
Manufacturer's date2025-07-25
NHTSA componentSUSPENSION

NHTSA's summary

Complaint Creaking noise, in irregular sequence when driving slowly in combination with slight steering movements and/or Creaking/crackling noises from the area of the wheel bearing on the front axle when cornering/ maneuvering. Sound file attached for comparison. MUST match noise for proper diagnosis. NOTE: Steering functionality is not affected. Cause Contact area between wheel bearing and steering knuckle. See also: LI35.30-P-058566 (Axle Half Shaft noise when changing direction - Front) LI33.30-P-056665 (Axle Half Shaft noise when changing direction - Rear) LI40.10-P-059248 (Wheel cracking noise when cornering) Remedy 1. Perform Operation A and evaluate by testing vehicle. 2. If noise is still present, perform Operation A again. 3. If noise is still present after re-testing, perform Operation B. Operation A: 1. Clean contact surfaces of wheel bearing and steering knuckle with brake cleaner (see areas marked blue in pictures "2.jpg" and "3.jpg"). NOTE: The front area of the wheel bearing and the seals must not come into contact with the cleaner, otherwise, the sealing rings will be damaged. 2. Clean threads of wheel bearing mounting. 3. Thinly coat contact surfaces of wheel bearing, steering knuckle, and axle mating face with Molykote (annular joint grease) (see areas marked blue in pictures "2.jpg" and "3.jpg"). NOTE: Axle mating face greasing is also covered in LI35.30-P-058566 and LI33.30-P-056665. Operation B (Only applies to 192 and 232 in listed FIN range above): 1. Replace steering knuckle. 2. Wheel bearings do not need to be replaced.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Suspension

Vehicles listed
MERCEDES-BENZ AMG C432023 to 2024
MERCEDES-BENZ AMG C63 S E2024
MERCEDES-BENZ AMG E532019 to 2023
MERCEDES-BENZ AMG EQE2023 to 2024
MERCEDES-BENZ AMG EQE SUV 4MATIC2024 to 2025
MERCEDES-BENZ AMG EQS2022 to 2024
MERCEDES-BENZ AMG GLC432016 to 2024
MERCEDES-BENZ AMG GLC632018 to 2021
MERCEDES-BENZ AMG GLC63 S2020 to 2022
MERCEDES-BENZ AMG GLC63 S E2025
MERCEDES-BENZ AMG GLC63S2018 to 2019
MERCEDES-BENZ AMG S 63 E 4MATIC+2024 to 2025
MERCEDES-BENZ C 3002022 to 2025
MERCEDES-BENZ E 3502025
MERCEDES-BENZ E 350 4MATIC2025
MERCEDES-BENZ E 4002018
MERCEDES-BENZ E 4502019 to 2023
MERCEDES-BENZ E 450 4MATIC2025
MERCEDES-BENZ E 450 4MATIC ALL-TERRAIN2025
MERCEDES-BENZ EQE 350 4MATIC2023 to 2025
MERCEDES-BENZ EQE 350+2023 to 2024
MERCEDES-BENZ EQE 500 4MATIC2023 to 2024
MERCEDES-BENZ EQE SUV 350 4MATIC2023 to 2025
MERCEDES-BENZ EQE SUV 350+2023 to 2025
MERCEDES-BENZ EQE SUV 500 4MATIC2023 to 2025
MERCEDES-BENZ EQS 450 4MATIC2023 to 2024
MERCEDES-BENZ EQS 450+2022 to 2024
MERCEDES-BENZ EQS 580 4MATIC2022 to 2023
MERCEDES-BENZ EQS SUV 450 4MATIC2023 to 2025
MERCEDES-BENZ EQS SUV 450+2023 to 2025
MERCEDES-BENZ EQS SUV 580 4MATIC2023 to 2025
MERCEDES-BENZ GLC 3002018 to 2025
MERCEDES-BENZ GLC 300 4MATIC2023 to 2025
MERCEDES-BENZ GLC3002016 to 2017
MERCEDES-BENZ S 500 4MATIC2023
MERCEDES-BENZ S 580 4MATIC2023
MERCEDES-BENZ S 580 E 4MATIC2023
MERCEDES-BENZ S 580 E 4MATIC2025
MERCEDES-MAYBACH EQS SUV 680 4MATIC2024 to 2025
MERCEDES-MAYBACH S 680 4MATIC2023

Listing a model year does not mean every vehicle of it is concerned: the document says which.