# Over\-the\-air update SCCM\-25.DC MachE

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Over\-the\-air update
- NHTSA id: 11020142
- Published by NHTSA: 2025\-07\-02
- Manufacturer's number: SCCM\-25.DC MachE
- Manufacturer's date: 2025\-06\-09
- Campaign id or software version: SCCM\-25.DC
- NHTSA component: LANE DEPARTURE: WARNING; ELECTRICAL SYSTEM; LANE DEPARTURE: ASSIST

## NHTSA's summary

Quality improvements include: \-Ensures the lane change assist turn signal flashes until the change maneuver is complete

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11020142-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11020142-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Electrical system, Lane departure and lane keeping

## Vehicles listed

- 2021 to 2022 FORD MUSTANG MACH E

## Other bulletins for the same vehicles and component

- [SSM 54668](/bulletins/11030788.md), 2026-04-06, Service bulletin: LANE DEPARTURE: BLIND SPOT DETECTION; LANE DEPARTURE: WARNING; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; FORWARD COLLISION AVOIDANCE: WARNINGS; LANE DEPARTURE: ASSIST. Some 2021\-2023 Mach\-E and 2022\-2024 F\-150 vehicles may have customers or dealerships that wish to activate new BlueCruise features \(example: Lane Change Assist\). New BlueCruise features can only be activated/delivered via an over\-the\-air update \(OTA\). Inform customers that they will need to wait for the update to be pushed to their vehicle. There is no way to manually push the update. If the update fails, OTA will re\-attempt an update later.
- [TSB 25\-2512](/bulletins/11024522.md), 2025-10-28, Service bulletin: LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; ELECTRICAL SYSTEM. This article supersedes TSB 25\-2104 to update the labor times associated with the Service Procedure. Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: \* Inoperative BlueCruise and lane centering \* DTC U2018:51 stored in the camera module \- rear \(CMR\) \* DTC U0565:86 stored in the image processing module A \(IPMA\) \* DTC U3000:49 is not stored in the CMR This may be due to the software in the CMR.
- [TSB 25\-2427](/bulletins/11023196.md), 2025-09-18, Service bulletin: FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: ASSIST. Some of the vehicles listed in the Model statement above may exhibit an inoperative Blue Cruise and Lane Keeping system with diagnostic trouble code \(DTC\) U3000:49 with a status byte of 8F stored in the camera module\-rear \(CMR\). This may be due to the CMR software level. NOTE: The driver status monitor camera module may also be called camera module\-rear.
- [SSM 54065](/bulletins/11020891.md), 2025-07-24, Service bulletin: FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; LANE DEPARTURE: ASSIST. Some 2022\-2024 Mustang Mach\-E vehicles may exhibit an inoperative BlueCruise and lane centering with diagnostic trouble code \(DTC\) U3000:49 stored in the camera module rear \(CMR\). This may be due to the software level of the CMR. Inform customers that engineering is currently working on a solution for this condition that is expected in Q3 2025. Monitor Professional Technician System \(PTS\) for additional information.
- [TSB 24\-2251](/bulletins/11006769.md), 2024-09-02, Service bulletin: LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. This article supersedes TSB 24\-2087 to update the vehicle lines, model years affected, action and service procedure. Some 2021\-2024 Mustang Mach\-E/F\-150, 2022\-2024 F\-150 Lightning/Expedition/Navigator, 2023\-2024 Corsair vehicles may exhibit an inoperative BlueCruise and lane centering with DTCs U2018:51 stored in the camera module \- rear \(CMR\) and U0565:86 stored in the image processing module A \(IPMA\) without DTC U3000:49 stored in the CMR. This may be due to the software level of the CMR. To correct the condition, follow the Service Procedure to reprogram the CMR module using the latest software level of the Ford Diagnosis and Repair System \(FDRS\).
- [TSB 23\-2137](/bulletins/10236035.md), 2023-05-24, Service bulletin: EQUIPMENT; LANE DEPARTURE: LANE KEEP: STEERING ASSIST. Some 2021\-2023 Mustang Mach\-E vehicles may exhibit various driver assistance system warning messages or inoperative features and/or Diagnostic Trouble Code \(DTC\) U3000:49 stored in the Image Processing Module A \(IPMA\) that will not clear and not be stored in the vehicle's history. DTC C1001:31 and/or U3000:89 may be stored in the IPMA, but may have recently been cleared and stored in the vehicle's history. This may be due to a connection issue between the IPMA Camera and the IPMA. To correct the condition, perform the following service procedure to repair the connection and reset the IPMA.

JSON: [/v1/bulletins/11020142](/v1/bulletins/11020142)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Over-the-air%20update%20SCCM-25.DC%20MachE&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11020142&vehicle=Over-the-air%20update%20SCCM-25.DC%20MachE)