# Service bulletin 9100614

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11019773
- Published by NHTSA: 2025\-06\-26
- Manufacturer's number: 9100614
- Manufacturer's date: 2025\-06\-18
- NHTSA component: ENGINE

## NHTSA's summary

ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition \(compressible plunger\) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition \(non\-compressible plunger\) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER\(S\) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11019773-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11019773-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine

## Vehicles listed

- 2017 to 2025 CHRYSLER PACIFICA
- 2017 to 2025 CHRYSLER PACIFICA PLUG\-IN HYBRID
- 2020 to 2025 CHRYSLER VOYAGER
- 2016 to 2025 DODGE DURANGO
- 2020 to 2025 JEEP GLADIATOR
- 2016 to 2024 JEEP GRAND CHEROKEE
- 2021 to 2024 JEEP GRAND CHEROKEE 4XE
- 2021 to 2024 JEEP GRAND CHEROKEE L
- 2022 to 2025 JEEP GRAND WAGONEER
- 2022 to 2025 JEEP WAGONEER
- 2018 to 2025 JEEP WRANGLER
- 2019 to 2025 RAM 1500
- 2022 to 2026 RAM PROMASTER

## Recalls for the same vehicles and component

- [2025617](/recalls/tc/2025617.md), 2025-11-06: Engine
- [25V766000](/recalls/nhtsa/25V766000.md), 2025-11-06: ENGINE
- [24V926000](/recalls/nhtsa/24V926000.md), 2024-12-12: STRUCTURE:FRAME AND MEMBERS; FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY
- [2023338](/recalls/tc/2023338.md), 2023-06-08: Engine
- [23V412000](/recalls/nhtsa/23V412000.md), 2023-06-08: ENGINE
- [23V411000](/recalls/nhtsa/23V411000.md), 2023-06-08: ENGINE AND ENGINE COOLING
- [2023221](/recalls/tc/2023221.md), 2023-04-13: Engine
- [22V865000](/recalls/nhtsa/22V865000.md), 2022-11-23: ENGINE
- [2022584](/recalls/tc/2022584.md), 2022-10-14: Engine
- [22V767000](/recalls/nhtsa/22V767000.md), 2022-10-13: ENGINE; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

## Other bulletins for the same vehicles and component

- [18\-083\-26](/bulletins/11038540.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● \*\*P2237\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 1 Sensor 1. ● P015D\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 2 Sensor 1. ● P2AF6\-00 \- Starter Relay 3 Stuck Off. ● P0E7C\-00 \- Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D\-00 \- Coolant Bypass Valve "B" Control Circuit High. ● P0E7E\-00 \- Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F\-00 \- Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C\-00 \- Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461\-00 \- Fuel Level Sensor "A" Circuit Range/performance. ● P0073\-00 \- Ambient Air Temperature Sensor Circuit "A" High. ● P0072\-00 \- Ambient Air Temperature Sensor Circuit "A" Low. ● P062B\-00 \- Internal Control Module Fuel Injector Control Performance. ● B1810\-00 \- Driver Door Shorted Low. ● B25C7\-00 \- Redundant Driver Door Shorted Low.\*\* ● U0673\-00 \- Lost Communication With Ion Sense Module \(in active or stored status\). ● P00C6\-00 \- Fuel Rail Pressure Too Low \- Engine Cranking \(in active or stored status\). ● P2C90\-00 \- Crankcase Ventilation System \- Hose "A" Disconnected \(in active or stored status\). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
- [18\-082\-26](/bulletins/11038539.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● \*\*P2237\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 1 Sensor 1. ● P015D\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 2 Sensor 1. ● P2AF6\-00 \- Starter Relay 3 Stuck Off. ● P0E7C\-00 \- Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D\-00 \- Coolant Bypass Valve "B" Control Circuit High. ● P0E7E\-00 \- Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F\-00 \- Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C\-00 \- Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461\-00 \- Fuel Level Sensor "A" Circuit Range/performance. ● P0073\-00 \- Ambient Air Temperature Sensor Circuit "A" High. ● P0072\-00 \- Ambient Air Temperature Sensor Circuit "A" Low. ● P062B\-00 \- Internal Control Module Fuel Injector Control Performance. ● B1810\-00 \- Driver Door Shorted Low. ● B25C7\-00 \- Redundant Driver Door Shorted Low.\*\* ● U0673\-00 \- Lost Communication With Ion Sense Module \(in active or stored status\). ● P00C6\-00 \- Fuel Rail Pressure Too Low \- Engine Cranking \(in active or stored status\). ● P2C90\-00 \- Crankcase Ventilation System \- Hose "A" Disconnected \(in active or stored status\). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
- [18\-079\-26](/bulletins/11038536.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Update Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination, and the vehicle may exhibit SYMPTOM: or set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P0300\-00 \- Multiple Cylinder Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0301\-00 \- Cylinder 1 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0302\-00 \- Cylinder 2 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0303\-00 \- Cylinder 3 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0304\-00 \- Cylinder 4 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0305\-00 \- Cylinder 5 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0306\-00 \- Cylinder 6 Misfire \- in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves inspecting the PCM software level and, if necessary, reprogramming the PCM with the latest available software.
- [18\-071\-26 REV. B](/bulletins/11038534.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P2237\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 1 Sensor 1. ● P015D\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 2 Sensor 1. ● P0E7C\-00 \- Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D\-00 \- Coolant Bypass Valve "B" Control Circuit High. ● P0E7E\-00 \- Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F\-00 \- Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C\-00 \- Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461\-00 \- Fuel Level Sensor "A" Circuit Range/performance. ● P0072\-00 \- Ambient Air Temperature Sensor Circuit "A" Low. ● P062B\-00 \- Internal Control Module Fuel Injector Control Performance. ● B1810\-00 \- Driver Door Shorted Low. ● B25C7\-00 \- Redundant Driver Door Shorted Low. ● U0104\-00 \- Lost Communication With Cruise Control Module \(NA Market Only\) \(In Active or Stored status\). ● U0405\-00 \- Invalid Data Received From Cruise Control Module \(NA Market Only\) \(In Active or Stored status\). NOTE: Vehicles setting DTCs U0405\-00 and U0104\-00 may experience an inability to be cleared. ● P06DD\-00 \- Engine Oil Pressure Control Circuit Performance/Stuck Off. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
- [18\-015\-26 REV. A](/bulletins/11038533.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P0300\-00 \- Multiple Cylinder Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0301\-00 \- Cylinder 1 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0302\-00 \- Cylinder 2 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0303\-00 \- Cylinder 3 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0304\-00 \- Cylinder 4 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0305\-00 \- Cylinder 5 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0306\-00 \- Cylinder 6 Misfire \- in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves inspecting the vehicle and, if required, reprogramming the PCM with the latest available software.
- [18\-083\-26](/bulletins/11038503.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● \*\*P2237\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 1 Sensor 1. ● P015D\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 2 Sensor 1. ● P2AF6\-00 \- Starter Relay 3 Stuck Off. ● P0E7C\-00 \- Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D\-00 \- Coolant Bypass Valve "B" Control Circuit High. ● P0E7E\-00 \- Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F\-00 \- Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C\-00 \- Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461\-00 \- Fuel Level Sensor "A" Circuit Range/performance. ● P0073\-00 \- Ambient Air Temperature Sensor Circuit "A" High. ● P0072\-00 \- Ambient Air Temperature Sensor Circuit "A" Low. ● P062B\-00 \- Internal Control Module Fuel Injector Control Performance. ● B1810\-00 \- Driver Door Shorted Low. ● B25C7\-00 \- Redundant Driver Door Shorted Low.\*\* ● U0673\-00 \- Lost Communication With Ion Sense Module \(in active or stored status\). ● P00C6\-00 \- Fuel Rail Pressure Too Low \- Engine Cranking \(in active or stored status\). ● P2C90\-00 \- Crankcase Ventilation System \- Hose "A" Disconnected \(in active or stored status\). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
- [18\-082\-26](/bulletins/11038502.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● \*\*P2237\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 1 Sensor 1. ● P015D\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 2 Sensor 1. ● P2AF6\-00 \- Starter Relay 3 Stuck Off. ● P0E7C\-00 \- Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D\-00 \- Coolant Bypass Valve "B" Control Circuit High. ● P0E7E\-00 \- Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F\-00 \- Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C\-00 \- Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461\-00 \- Fuel Level Sensor "A" Circuit Range/performance. ● P0073\-00 \- Ambient Air Temperature Sensor Circuit "A" High. ● P0072\-00 \- Ambient Air Temperature Sensor Circuit "A" Low. ● P062B\-00 \- Internal Control Module Fuel Injector Control Performance. ● B1810\-00 \- Driver Door Shorted Low. ● B25C7\-00 \- Redundant Driver Door Shorted Low.\*\* ● U0673\-00 \- Lost Communication With Ion Sense Module \(in active or stored status\). ● P00C6\-00 \- Fuel Rail Pressure Too Low \- Engine Cranking \(in active or stored status\). ● P2C90\-00 \- Crankcase Ventilation System \- Hose "A" Disconnected \(in active or stored status\). This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
- [18\-079\-26](/bulletins/11038499.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Update Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination, and the vehicle may exhibit SYMPTOM: or set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P0300\-00 \- Multiple Cylinder Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0301\-00 \- Cylinder 1 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0302\-00 \- Cylinder 2 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0303\-00 \- Cylinder 3 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0304\-00 \- Cylinder 4 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0305\-00 \- Cylinder 5 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0306\-00 \- Cylinder 6 Misfire \- in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves inspecting the PCM software level and, if necessary, reprogramming the PCM with the latest available software.
- [18\-071\-26 REV. B](/bulletins/11038497.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P2237\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240\-00 \- O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254\-00 \- O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247\-00 \- O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 1 Sensor 1. ● P015D\-00 \- O2 Sensor Delayed Response \- Lean To Rich Bank 2 Sensor 1. ● P0E7C\-00 \- Coolant Bypass Valve "B" Control Circuit Low. ● P0E7D\-00 \- Coolant Bypass Valve "B" Control Circuit High. ● P0E7E\-00 \- Coolant Bypass Valve "B" Control Circuit Range/Performance. ● P0E7F\-00 \- Coolant Bypass Valve "B" Control Circuit Stuck/Open. ● U063C\-00 \- Lost Communication With Coolant Bypass Valve Actuator "B". ● P0100\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit. ● P0101\-00 \- Mass Or Volume Air Flow Sensor "A" Circuit Range/Performance. ● P0461\-00 \- Fuel Level Sensor "A" Circuit Range/performance. ● P0072\-00 \- Ambient Air Temperature Sensor Circuit "A" Low. ● P062B\-00 \- Internal Control Module Fuel Injector Control Performance. ● B1810\-00 \- Driver Door Shorted Low. ● B25C7\-00 \- Redundant Driver Door Shorted Low. ● U0104\-00 \- Lost Communication With Cruise Control Module \(NA Market Only\) \(In Active or Stored status\). ● U0405\-00 \- Invalid Data Received From Cruise Control Module \(NA Market Only\) \(In Active or Stored status\). NOTE: Vehicles setting DTCs U0405\-00 and U0104\-00 may experience an inability to be cleared. ● P06DD\-00 \- Engine Oil Pressure Control Circuit Performance/Stuck Off. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
- [18\-015\-26 REV. A](/bulletins/11038496.md), 2026-10-16, Service bulletin: ENGINE. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P0300\-00 \- Multiple Cylinder Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0301\-00 \- Cylinder 1 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0302\-00 \- Cylinder 2 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0303\-00 \- Cylinder 3 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0304\-00 \- Cylinder 4 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0305\-00 \- Cylinder 5 Misfire \- in Active or Stored status set during cold start catalyst heating. ● P0306\-00 \- Cylinder 6 Misfire \- in Active or Stored status set during cold start catalyst heating. Customers may also comment on one or more of the following: ● Vehicle has a rough idle. ● Engine has a miss. ● Noisy valvetrain. This bulletin involves inspecting the vehicle and, if required, reprogramming the PCM with the latest available software.

JSON: [/v1/bulletins/11019773](/v1/bulletins/11019773)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%209100614&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11019773&vehicle=Service%20bulletin%209100614)