WenmarOpen by Wenmar Pro

Service bulletin S2523000038

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id11017406
Published by NHTSA2025-05-01
Manufacturer's numberS2523000038
Manufacturer's date2025-04-30
NHTSA componentSTRUCTURE:BODY
Manufacturer's systemExterior Mirror: electrochromic Glass

NHTSA's summary

Drivers Side Exterior Mirror Takes Longer To Defrost Or Clear Than The Passenger Side Exterior Mirror.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Body and frame

Vehicles listed
JEEP GRAND WAGONEER2022, 2023, 2024, 2025
JEEP WAGONEER2022, 2023, 2024, 2025
RAM 15002019, 2020, 2021, 2022, 2023, 2024, 2025

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
26V5840002026-09-10. STRUCTURE:BODY:ROOF AND PILLARS
20255062025-09-25. Structure
25V6420002025-09-25. STRUCTURE:EXTERIOR TRIM
20254672025-09-11. Structure
25V5930002025-09-11. STRUCTURE:EXTERIOR TRIM
23V5450002023-08-03. STRUCTURE:BODY:ROOF AND PILLARS
20226992022-12-08. Structure
22V9040002022-12-08. STRUCTURE:BODY:TAILGATE:HINGE AND ATTACHMENTS

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
1145082026-09-23. Service bulletin. RAIL KIT – LUGGAGE AND REMOVABLE
1145092026-09-23. Service bulletin. RAIL KIT – LUGGAGE AND REMOVABLE
91008922026-09-10. Service bulletin. Switch - Tailgate Handle Prior to replacing the Tailgate Handle Switch, please review MasterTech Article - Tailgate Handle Inoperative.
91008862026-09-03. Service bulletin. Sunroof Assy Sunroof glass and/or sunshade cannot open/close (inoperative). 1. Please follow the service procedure: 08-Electrical/8N - Power Systems/ Power Top, Sunroof/ Diagnosis and Testing. 2. If sunroof motors continue to be inoperative, please contact STAR and reference SET 1599. ***This should be done before trying to replace the sunroof motors.***
91003452026-09-03. Service bulletin. LATCH Front Door for Doors that Won't Open From Interior, cable dislodged or Door latch cables coming loose. Engineering is looking to collect pictures of the latches and cables as they are found by the dealers. These pictures will help us understand why they are coming lose, to develop a corrective action plan. Please submit pictures to the DID system.
1138552026-08-26. Service bulletin. SWITCH AND BEZEL - FRONT DOOR
1138542026-08-26. Service bulletin. SWITCH AND BEZEL - FRONT DOOR
1138042026-08-13. Service bulletin. MODULE - LIFTGATE
S26080000332026-07-23. Service bulletin. Cluster Message “To Operate Tailgate Shift to Park” Vehicle is In Park
9100855 Rev 12026-07-18. Service bulletin. 2 WAY LUMBAR SWITCH If the Driver Seat Lumbar Support is inoperative, stuck, or not responding as expected, obtain the following information from the customer prior to replacing the lumbar switch: 1.Which lumbar function is not operating properly? -Inflate (Extend) -Deflate (Retract) -Both directions 2.Is the concern constant or intermittent? 3.If intermittent, how often does it occur? -Daily -Weekly -Randomly 4.Is the lumbar support stuck in the extended or retracted position? -Extended -Retracted -Neither 5.Does the lumbar support respond after pressing the switch multiple times? -Yes / No 6.Does the concern occur only while driving, only at key-on, or while the vehicle is parked? 7.Has the concern occurred after the vehicle has been sitting for an extended period (overnight or several hours)? -Yes / No 8.Is the lumbar switch physically sticking or binding in either direction? -Yes / No 9.Has the lumbar switch, seat assembly, or lumbar support assembly been previously repaired or replaced? -Yes / No Before replacing the lumbar switch, verify proper power and ground, connector engagement, wiring integrity, and inspect for damaged harnesses, disconnected components, or signs of physical damage/abuse. If no external issues are identified, verify lumbar motor operation and related circuits prior to replacing the lumbar switch.