# Service bulletin 07\-002\-25

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11017136
- Published by NHTSA: 2025\-04\-23
- Manufacturer's number: 07\-002\-25
- Manufacturer's date: 2025\-04\-16
- NHTSA component: ENGINE
- Manufacturer's system: Thermostatic valve Gasket

## NHTSA's summary

"Engine Coolant Leak From Thermostatic valve Gasket Customers may experience the following: ● Coolant is leaking at the thermostatic valve. This bulletin involves inspecting and, if necessary, replacing the thermostatic valve gasket."

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11017136-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11017136-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine

## Vehicles listed

- 2025 JEEP COMPASS
- 2024 to 2025 JEEP RENEGADE

## Other bulletins for the same vehicles and component

- [18\-081\-26](/bulletins/11038538.md), 2026-10-16, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P0607 \- Control Module Performance. Customers may also comment on one or more of the following: ● The vehicle will not start until the ignition is cycled for a second time. ● Engine malfunction \(injection\) warning lamp illuminated in the Instrument Panel Cluster \(IPC\). This bulletin involves reprogramming the PCM with the latest available software.
- [18\-081\-26](/bulletins/11038501.md), 2026-10-16, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Flash: Powertrain Control Module \(PCM\) Updates Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may SYMPTOM: exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P0607 \- Control Module Performance. Customers may also comment on one or more of the following: ● The vehicle will not start until the ignition is cycled for a second time. ● Engine malfunction \(injection\) warning lamp illuminated in the Instrument Panel Cluster \(IPC\). This bulletin involves reprogramming the PCM with the latest available software.
- [S2609000011](/bulletins/11037354.md), 2026-09-17, Service bulletin: ENGINE. MIL\-On and/or Engine Oil Leak
- [09\-010\-26 REV. B](/bulletins/11037278.md), 2026-09-10, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Oil Leak Through The Rear Crankshaft Oil Seal \(Flywheel Side\) Customers may comment on the following: ● Oil Pressure warning light illuminates. ● Engine oil is leaking onto the floor beneath the vehicle This bulletin involves inspecting for oil leaks and if necessary replacing the rear crankshaft oil seal \(flywheel side\)
- [09\-021\-26](/bulletins/11036749.md), 2026-09-03, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Noisy Timing Chain Tensioner Customers may experience the following: SYMPTOM: ● A metallic knocking noise coming from the timing chain area during engine operation. This bulletin involves replacing the timing chain tensioner.
- [09\-010\-26 REV. A](/bulletins/11035171.md), 2026-07-23, Service bulletin: ENGINE. Not applicable to vehicles built for US market. Oil Leak Through The Rear Crankshaft Oil Seal \(Flywheel Side\) Customers may comment on the following: SYMPTOM: ● Oil Pressure warning light illuminates. ● Engine oil is leaking onto the floor beneath the vehicle. This bulletin involves inspecting for oil leaks and if necessary replacing the rear crankshaft oil seal \(flywheel side\).
- [S2609000010](/bulletins/11034921.md), 2026-07-08, Service bulletin: ENGINE. Mis\-Machined Engine Block
- [9100852](/bulletins/11034918.md), 2026-07-08, Service bulletin: ENGINE. When long block is received, inspection needs to be performed per SOL S2609000010 before the repair begins. If the block machining is not complete according to information in SOL, a new long block will need to be ordered.
- [112639](/bulletins/11034912.md), 2026-07-08, Service bulletin: ENGINE. THROTTLE BODY – NONE
- [112640](/bulletins/11034911.md), 2026-07-08, Service bulletin: ENGINE. THROTTLE BODY – NONE

JSON: [/v1/bulletins/11017136](/v1/bulletins/11017136)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2007-002-25&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11017136&vehicle=Service%20bulletin%2007-002-25)