# Service bulletin 102938

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11014890
- Published by NHTSA: 2025\-03\-04
- Manufacturer's number: 102938
- Manufacturer's date: 2025\-02\-18
- NHTSA component: ENGINE; LANE DEPARTURE: BLIND SPOT DETECTION
- Manufacturer's system: Radiator

## NHTSA's summary

COOLER \- AUXILIARY LOW TEMPERATURE

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11014890-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11014890-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Engine, Blind spot detection

## Vehicles listed

- 2022 to 2025 JEEP GRAND WAGONEER
- 2022 to 2025 JEEP WAGONEER

## Other bulletins for the same vehicles and component

- [S2408000112](/bulletins/11008435.md), 2024-10-04, Service bulletin: LANE DEPARTURE: BLIND SPOT DETECTION; UNKNOWN OR OTHER. Blind Spot Warning Message Displayed on the Cluster
- [08\-190\-24](/bulletins/11006628.md), 2024-08-26, Service bulletin: LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; UNKNOWN OR OTHER; LANE DEPARTURE: BLIND SPOT DETECTION. "Flash: Central ADAS Decision Module \(CADM\) Updates Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● C008E \- ECU Internal Performance. ● C2203\-00 \- Current VIN Missing/Mismatch. ● U015C\-00 \- Lost Communication With Automated Driving System Control Module ""A"". In addition, the customer may comment on one ore more of the following: ● Active Lane Management \(ALM\) settings do not save and turns ""Off"" between key\-cycles. ● Adaptive Cruise Control \(ACC\) settings do not save between key\-cycles. Defaults back to ""4 Bars"". ● ""Automatic Emergency Braking \(AEB\) Unavailable Service Required"" pop up intermittently on the Instrument Panel Cluster \(IPC\). ● ""Active Lane Management \(ALM\) Unavailable Service Required"" warning message appears on the IPC with no active fault codes. ● Blind Spot Monitoring \(BSM\) Warning Light LED ""flickering"" when activated. ● Traffic Sign Information \(TSI\) feature Indicator on the IPC ""blinking"" when driving past consecutive speed signs. This bulletin involves reprogramming of the CADM with the latest available software."
- [2308723](/bulletins/10243225.md), 2023-10-02, Service bulletin: ELECTRICAL SYSTEM:ADAS:BLINDSPOT:SENSORS; ELECTRICAL SYSTEM:ADAS:BLINDSPOT:SOFTWARE. Blind Spot Monitoring Disabled

JSON: [/v1/bulletins/11014890](/v1/bulletins/11014890)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20102938&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11014890&vehicle=Service%20bulletin%20102938)