# Service bulletin NTB24\-050A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11013275
- Published by NHTSA: 2025\-01\-30
- Manufacturer's number: NTB24\-050A
- Manufacturer's date: 2025\-01\-10
- NHTSA component: FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; FORWARD COLLISION AVOIDANCE: WARNINGS

## NHTSA's summary

FALSE ACTIVATION OF AEB OR FCW IF YOU CONFIRM The customer states they have experienced false activation and/or unexpected braking of the Automatic Emergency Braking \(AEB\) or Forward Collision Warning \(FCW\) system with a red/white flashing message in meter and a loud noise, AND There are no related DTCs stored. ACTION 1. Confirm the current ICC/ADAS 2 part number. 2. Reprogram the ICC/ADAS 2, if applicable. IMPORTANT: The purpose of ACTION \(above\) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11013275-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11013275-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance

## Vehicles listed

- 2023 NISSAN KICKS
- 2023 NISSAN redundant KICKS

## Other bulletins for the same vehicles and component

- [NTB19\-042F](/bulletins/11014472.md), 2025-02-25, Service bulletin: FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; ELECTRICAL SYSTEM; SERVICE BRAKES. AUTOMATIC EMERGENCY BRAKING WARNING LIGHT BLINKING APPLIED SYSTEMS: Vehicles equipped with a lane camera \(see Figure 1\) SERVICE INFORMATION If the Automatic Emergency Braking \(AEB\) warning light or is blinking \(but not illuminated steadily\) or the customer states it is blinking, and there are no related DTCs, inspect the windshield. A blinking AEB warning light may occur under the following conditions: • When contamination or foreign material adhere to the lane camera viewing window on the windshield. • When driving while it is snowing or when frost forms on the lane camera viewing window on the windshield. • When the lane camera viewing window on the windshield is temporarily fogged up. Figure 1 Nissan Bulletins are intended for use by qualified technicians, not 'do\-it\-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know\-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. HINT: o Refer to the applicable ESM for diagnosis if DTCs are present in the Laser/Radar, ICC/ADAS, or Lane Camera systems. o For further information: • Refer to the following pages. • Use the search keyword “blinking” in the ESM.
- [NTB19\-033G](/bulletins/11014471.md), 2025-02-25, Service bulletin: SERVICE BRAKES; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING; ELECTRICAL SYSTEM. INTELLIGENT CRUISE CONTROL INOPERATIVE AND AEB/FEB WARNING LIGHT ON OR RADAR OBSTRUCTION MESSAGE DISPLAYED WITH DTC C1A16 OR C2582 IF YOU CONFIRM IMPORTANT: The purpose of ACTION \(on the next page\) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Nissan Bulletins are intended for use by qualified technicians, not 'do\-it\-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know\-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. The customer states that the ICC stopped working while driving, OR The customer states that the AEB/FEB warning light is ON, or turned ON, while driving \(Figure 1\), OR The message “Unavailable Front Radar Obstruction” or “Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner's Manual” has displayed while driving \(Figure 2\). AND DTC C1A16, C1A16\-97, C2582, or C2582\-97 is the ONLY DTC stored. Figure 1 Figure 2 This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual
- [NTB24\-002](/bulletins/10249921.md), 2024-02-08, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; ELECTRICAL SYSTEM:ADAS:CONTROL MODULE. DTCS C1B53\-04 AND/OR C1B54\-04 STORED IN THE ADAS CONTROL MODULE IF YOU CONFIRM DTCs C1B53\-04 for “SIDE RDR R MALF” and/or C1B54\-04 for “SIDE RDR L MALF” are stored as CURRENT in the ADAS Control Module. AND The ESM diagnosis leads to Side Radar Sensor replacement. ACTION If replacing one or more affected Side Radar Sensor\(s\), refer to the SERVICE PROCEDURE in this bulletin to apply a strip of foam around each of the Side Radar Sensors before reinstalling the rear bumper fascia. HINT: This bulletin does not cover the diagnosis or replacement of the Side Radar Sensors.

JSON: [/v1/bulletins/11013275](/v1/bulletins/11013275)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20NTB24-050A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11013275&vehicle=Service%20bulletin%20NTB24-050A)