# Service bulletin LI68.10\-P\-070572

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11013184
- Published by NHTSA: 2025\-01\-29
- Manufacturer's number: LI68.10\-P\-070572
- Manufacturer's date: 2025\-01\-24
- NHTSA component: STRUCTURE:BODY

## NHTSA's summary

Complaint Noise from area of instrument panel Noise might occur in the following conditions: \- At engine speeds of 1500 rpm to 2000 rpm. \- In the speed range up to 45mph \- Type of noise: "rattling" / "whirring" / "creaking" Cause Attachment points between strut on shock absorber tower and firewall. Remedy Proceed as described below: 1. Measure the current torque at the rear screws/bolts \(strut to bulkhead\) and document the result 2. Loosen screw/bolt and move vehicle forwards and backwards approx. 2\-3 m \(to remove tension\) 3. Re\-tighten screws/bolts to specified torque \(35Nm \+/\-3.5Nm\) 4. Perform test drive and if noise issue is rectified, OK =\> No further measures required. 5. If the noise complaint is still present after the test drive then measure and document the current torque at the front screws/bolts \(strut to spring tower mounting console\) 6. Re\-tighten to the specified torque value \(50Nm\+/\-5Nm\) 7. Perform test drive and if noise issue is rectified, OK =\> No further measures required. 8. If the noise issue is still present after the test drive, then it is more than likely not related to the mounting of the struts on the body\-in\-white.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2025/MC-11013184-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2025/MC-11013184-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Body and frame

## Vehicles listed

- 2018 MERCEDES BENZ C 300 4MATIC
- 2015 MERCEDES BENZ REDUNDANT C63 AMG
- 2017 to 2024 MERCEDES\-BENZ AMG C43
- 2015 to 2021 MERCEDES\-BENZ AMG C63
- 2019 to 2023 MERCEDES\-BENZ AMG C63 S
- 2023 to 2024 MERCEDES\-BENZ AMG C63 S E
- 2015 to 2018 MERCEDES\-BENZ AMG C63S
- 2019 to 2023 MERCEDES\-BENZ AMG E53
- 2018 to 2023 MERCEDES\-BENZ AMG E63
- 2023 MERCEDES\-BENZ AMG E63 S
- 2017 to 2024 MERCEDES\-BENZ AMG GLC43
- 2018 to 2022 MERCEDES\-BENZ AMG GLC63
- 2020 to 2022 MERCEDES\-BENZ AMG GLC63 S
- 2018 to 2019 MERCEDES\-BENZ AMG GLC63S
- 2017 to 2024 MERCEDES\-BENZ C 300
- 2018 MERCEDES\-BENZ C 350 E
- 2015 to 2016 MERCEDES\-BENZ C300
- 2016 to 2017 MERCEDES\-BENZ C350
- 2015 MERCEDES\-BENZ C400
- 2016 to 2017 MERCEDES\-BENZ C450
- 2018 to 2019 MERCEDES\-BENZ E 300
- 2018 MERCEDES\-BENZ E 400
- 2019 to 2024 MERCEDES\-BENZ E 450
- 2025 MERCEDES\-BENZ E 450 4MATIC
- 2018 to 2024 MERCEDES\-BENZ GLC 300
- 2024 MERCEDES\-BENZ GLC 300 COUPE
- 2025 MERCEDES\-BENZ GLC 300E
- 2016 to 2017 MERCEDES\-BENZ GLC300
- 2019 MERCEDES\-BENZ GLC350E

JSON: [/v1/bulletins/11013184](/v1/bulletins/11013184)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20LI68.10-P-070572&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11013184&vehicle=Service%20bulletin%20LI68.10-P-070572)