Service bulletin 14-009-24
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 11010778 |
| Published by NHTSA | 2024-11-25 |
| Manufacturer's number | 14-009-24 |
| Manufacturer's date | 2024-11-21 |
| NHTSA component | FUEL/PROPULSION SYSTEM |
| Manufacturer's system | Fuel Filler Hose |
NHTSA's summary
"Fuel Filler Hose Not Fully Seated There are no Customer Symptoms for this issue. NOTE: Technicians may observe that the fuel filler hose is not fully seated upon inspection. This bulletin involves inspecting and possibly reseating the fuel filler hose."
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Fuel system
| JEEP GLADIATOR | 2024 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 9100833 REV1 | 2026-07-18. Service bulletin. Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way. |
|---|---|
| 9100833 | 2026-07-02. Service bulletin. Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way. |
| 103524 | 2025-05-02. Service bulletin. TANK - FUEL |
| 9100470 | 2025-01-21. Service bulletin. FUEL VAPOR CANISTER FILTER EVAP Fuel Filters are to be checked for restriction / blockage on a regular schedule. If the Filter is restricted or blocked then replace the part. |