# Service bulletin 18\-082\-24

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 11010258
- Published by NHTSA: 2024\-11\-07
- Manufacturer's number: 18\-082\-24
- Manufacturer's date: 2024\-10\-31
- NHTSA component: POWER TRAIN
- Manufacturer's system: Powertrain Control Module

## NHTSA's summary

"Flash: Powertrain Control Module \(PCM\) Updates Customers may experience the following: ● Vehicle may enter “Auto Park Mode” during an Engine Stop Start \(ESS\) event. The driver will be notified that the vehicle is entering “Auto Park Mode” by the blinking D on the shifter for three blinks and then automatically shifting into Park. To shift out of Park, the driver will have to press down on the brake pedal and cycle the ignition back to START, and move the shifter into the desired position This bulletin involves reprogramming the PCM with the latest available software."

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-11010258-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-11010258-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Transmission and driveline

## Vehicles listed

- 2025 CHRYSLER PACIFICA
- 2025 CHRYSLER PACIFICA PLUG\-IN HYBRID
- 2025 CHRYSLER VOYAGER

## Other bulletins for the same vehicles and component

- [S2621000005](/bulletins/11038330.md), 2026-10-07, Service bulletin: POWER TRAIN; ELECTRICAL SYSTEM. Shifter/ESM PRNDL Indicators Remain Off After Drained Battery Event And Jump Start
- [S2508000052 REV.B](/bulletins/11034353.md), 2026-07-02, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN. Service Shifter Message on the Cluster and Shifter Unable to move Out of Park
- [44D Combo](/bulletins/11034344.md), 2026-07-02, Warranty extension: POWER TRAIN; ELECTRICAL SYSTEM. Emissions Recall 44D \- Hybrid Control Module Software \- Dealer Notification Hybrid Control Processor \(HCP\) on about 69,189 of the above vehicles may have software that does not correctly report On\-Board Diagnostic \(OBD\) legislated Integrated Dual Charging Module \(IDCM\) diagnostic information. The HCP is required to store OBD legislated Diagnostic Trouble Codes \(DTC's\) and command the malfunction indicator light \(MIL\) on behalf of the IDCM.
- [S2508000052 Rev A](/bulletins/11033974.md), 2026-06-18, Service bulletin: POWER TRAIN. Service Shifter Message on the Cluster and Shifter Unable to move Out of Park
- [21\-037\-26](/bulletins/11032330.md), 2026-05-06, Service bulletin: POWER TRAIN. Internal Transmission Wiring Connector Short And Motor A Bearing Failure Customers must experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes \(DTCs\): ● P0A3F\-00 \- Drive Motor A Position Sensor 1 Circuit. ● P0A43\-00 \- Drive Motor A Position Sensor Circuit Intermittent. ● P0A45\-00 \- Drive Motor B Position Sensor 1 Circuit. ● P0C1A\-00 \- Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ● Vehicle is in limp mode This bulletin involves rebuilding the transmission
- [109997](/bulletins/11028781.md), 2026-02-12, Service bulletin: POWER TRAIN. ACTUATOR \- TRANSFER CASE
- [21\-040\-25](/bulletins/11024056.md), 2025-10-08, Service bulletin: POWER TRAIN. 948TE Transmission Reaction Shaft Service Bushing Kit Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code \(DTC\): ● P1DB7\-00 \- Torque Converter Clutch Performance.
- [S2523000050](/bulletins/11018608.md), 2025-05-28, Service bulletin: POWER TRAIN; ENGINE; UNKNOWN OR OTHER. Vibration From Engine Or Powertrain. Powertrain Mounting Neutralization Procedure. Discussion: Service information is in the process of being updated to include powertrain mount installation best practices. The new procedure will neutralize the mounts to lessen or remove unwanted mount tension that can lead to vibration complaints.

JSON: [/v1/bulletins/11010258](/v1/bulletins/11010258)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2018-082-24&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11010258&vehicle=Service%20bulletin%2018-082-24)