# Warranty extension B010722

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Warranty extension
- NHTSA id: 11009423
- Published by NHTSA: 2024\-10\-28
- Manufacturer's number: B010722
- Manufacturer's date: 2024\-10\-25
- Campaign id or software version: 001611900300
- NHTSA component: FUEL/PROPULSION SYSTEM

## NHTSA's summary

Fuel tank limited warranty for leakage, due to defects in materials or workmanship, has been extended to 15 years/150,000 miles as determined from the original in\-service date

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-11009423-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-11009423-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Fuel system

## Vehicles listed

- 2014 to 2016 BMW 228I
- 2014 BMW 328I
- 2014 to 2016 BMW 428I

## Recalls for the same vehicles and component

- [2021469](/recalls/tc/2021469.md), 2021-07-29: Fuel System
- [15V189000](/recalls/nhtsa/15V189000.md), 2015-03-31: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
- [2015136](/recalls/tc/2015136.md), 2015-03-27: Fuel System

## Other bulletins for the same vehicles and component

- [B010322](/bulletins/11009422.md), 2024-10-28, Warranty extension: FUEL/PROPULSION SYSTEM. Fuel tank limited warranty for leakage, due to defects in materials or workmanship, has been extended to 15 years/150,000 miles as determined from the original in\-service date
- [B010919](/bulletins/10230717.md), 2023-01-30, Service bulletin: FUEL SYSTEM, GASOLINE. For the eligible vehicles, BMW of North America, LLC \(BMW NA\) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in\-service date.
- [B170121](/bulletins/10214256.md), 2022-06-21, Service bulletin: ENGINE AND ENGINE COOLING; FUEL SYSTEM, GASOLINE. The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- [B170121](/bulletins/10212788.md), 2022-05-31, Service bulletin: FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING. The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
- [B010722](/bulletins/10212780.md), 2022-05-31, Service bulletin: FUEL SYSTEM, GASOLINE; EXTERIOR LIGHTING. Component and Issue Specific Limited Emission Warranty Extension. This bulletin is notice of a limited emission warranty extension. This is NOT a notice of a Recall or Service Action. There is no immediate repair required unless the BMW vehicle is currently experiencing this problem. Customer Notification Letter Even though this is NOT a Recall, BMW NA is sending VIN\-specific customer notification letters. The plastic fuel tank has two openings, one at the top right and the other at the top left. The top right opening \(passenger's side, serviceable\) provides a mounting point and repair access to the intake fuel pump/level sensor assembly. The top left opening \(driver's side, non\-serviceable\) serves as an access point for the installation of the suction jet pump/level sensor assembly during the fuel tank manufacturing process. After these components are installed, the top left side opening is then permanently closed and sealed with the installation of a circular Coex biopolymer plastic cover plate which is welded into place. Over time, the left side opening plastic cover plate weld may become damaged. Should this occur, there is the possibility of fuel leakage. Additionally, your vehicle will store the corresponding fault codes that may also be generated, and the Malfunction Indicator Lamp \(MIL\) will illuminate.
- [B160319](/bulletins/10161557.md), 2019-06-24, Service bulletin: FUEL SYSTEM, GASOLINE. NOISES FROM THE FUEL TANK AT IDLE AND WITH LOW FUEL LEVEL. While driving slowly with low RPM or while idling a faint knocking or fluttering noise can be heard from inside the fuel tank. The customer may describe this noise as a "helicopter" noise from the rear of the vehicle.
- [B160119](/bulletins/10153744.md), 2019-02-25, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. ENGINE STALLS AFTER STARTING OR WILL NOT START. The engine stalls right after starting \(when stationary\).
- [130512](/bulletins/10152348.md), 2018-12-17, Service bulletin: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. N20 Engine: Ticking Noise from High\-pressure Fuel Pump. The customer complains of a high\-frequency ticking noise from the engine compartment. The noise can be heard inside and outside the vehicle. Mechanical vibrations inside the high\-pressure fuel pump
- [130413](/bulletins/10152347.md), 2018-12-17, Service bulletin: FUEL SYSTEM, GASOLINE. N55 Engine: Erroneous Service Engine Soon Lamp Illuminated with Mixture Faults Stored in the DME. INFORMATION An error has been identified in the current version of ETK regarding N55 fuel injector replacement part numbers and production dates. Installing the incorrect injector part number can lead to an erroneous Service Engine Soon lamp illumination and various mixture faults stored in the DME. Correct part numbers and applicable production dates: P/N 13 64 7 639 994 is for all vehicles produced from 7/2013 P/N 13 64 7 597 870 is for all vehicles produced up to 7/2013
- [B130315](/bulletins/10152306.md), 2018-12-17, Service bulletin: FUEL SYSTEM, GASOLINE. "N20 and N26 Engines: ETK Injector Part Number Error. INFORMATION The current version of ETK has an error on screen 13\_1417: ""High \-pressure pump/Tubing."" When selecting the high\-pressure pump, the screen states ""only in conjunction with injector."" Disregard this statement and only replace the high\-pressure pump. If injectors need to be replaced, enter the VIN of the vehicle into the ETK and select the part numbers found on screen 13\_1416: ""High\-pressure rail/injector/mounting."" Always enter the VIN for the vehicle into ETK when searching for parts. When the ETK is corrected, this SIB will be updated. WARRANTY INFORMATION Not applicable. \[ Copyright \(c\)2015 BMW of North America, Inc. \] https://www.bmwtis.net/tiscode/cgi\-bin/bulletin.aspx?sie\_path=/tsb/bulletins/htm\_store/224...5/4/2015"

JSON: [/v1/bulletins/11009423](/v1/bulletins/11009423)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Warranty%20extension%20B010722&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11009423&vehicle=Warranty%20extension%20B010722)