WenmarOpen by Wenmar Pro

Warranty extension M010424

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeWarranty extension
NHTSA id11006765
Published by NHTSA2024-09-02
Manufacturer's numberM010424
Manufacturer's date2024-08-12
Campaign id or software version2516900100
NHTSA componentPOWER TRAIN

NHTSA's summary

For the eligible vehicles listed above, the limited warranty for the vehicle’s Selector Lever Magnetic Shift Interlock Mechanism (Gearshift lug assembly portion) has been extended to: 10 years/120,000 miles as determined by the vehicle’s original in-service date, When a gearshift lug repair kit (item # 2) installation procedure is required to be performed to address a displayed Check Control message (CCM) that states: "P not engaged - secure vehicle with parking brake against rolling away."

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Transmission and driveline

Vehicles listed
MINI CLUBMAN2014
MINI CLUBMAN2015
MINI CLUBMAN2016, 2017, 2018
MINI COOPER2014 to 2018
MINI COUNTRYMAN2014, 2015, 2016, 2017, 2018

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
M0104242025-07-31. Warranty extension. The automatic transmission limited warranty for the vehicle Selector Lever Magnetic Shift Interlock Mechanism (Gearshift lug assembly portion) has been extended to 10 years/120,000 miles, as determined by the vehicle’s original in-service date, when a gearshift lug repair kit installation procedure is required to be performed to address a displayed Check Control message (CCM) that states P not engaged - secure vehicle with parking brake against rolling away.
Guide2022-08-01. Service bulletin. MINI crankshaft guide bearing service action (update 2)
M310316M06042022-08-01. Service bulletin. Mini parts logistics TEC 26 turbo charger return
M2301212022-01-24. Service bulletin. When the vehicle is on a lift and wheels are manually spun, a clanking noise is heard from the transmission area.
M1301202020-06-15. Service bulletin. TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME. All models: FC 191C02 - Fuel tank ventilation system 2nd discharge point: malfunction FC 195014 - Differential pressure sensor tank vent valve signal: fixed FC 118001 - Mixture control: mixture too lean FC 118401 - Mixture control: mixture too lean large deviation CAUSE Internal mechanical defect in the tank ventilation valve. The defect can also result in a very loud clicking noise when the valve is cycling.
M2401192019-07-22. Service bulletin. EGS FAULTS STORED AFTER AISIN TRANSMISSION REPLACEMENT. Due to hardware changes in the AISIN GA6F21AW or GA8F22AW transmissions.
M2301082019-01-07. Service bulletin. "MANUAL TRANSMISSION - STIFF DIAGONAL GEARSHIFT LEVER MOVEMENT. The customer may complain of a ""stiff diagonal shift"" (e.g., N-R, R-N, 2-3/3-2 or 4-5/5-4). Also, in some cases, gears cannot be selected, or the selector gear does not go into the neutral position. CAUSE 1. The deflection lever circlip of the gearshift mechanism is damaged or missing. 2. Possible corrosion at the gearshift mechanism (shift cables or transmission gearshift unit)"
M1213152018-12-10. Service bulletin. ?SUBJECT Service Action: Program Control Units (DME) . A Check Control Message could intermittently be displayed indicating a Start/Stop Function failure. Vehicle may not restart after stopping. The following fault is stored in the DME: Fault 20BA20: clutch switch, signal: missing In addition the BDC may have the following fault stored: Fault 804084: clutch switch, plausibility fault compared to CAN signal This can occur if for example 14 gears changes are made, but the upper clutch position switch is only activated 10 times. This difference could occur when the clutch pedal is not being fully released between gear shifts or by resting a foot on the pedal so the upper switch position is not recognized.
M1206152018-11-05. Service bulletin. "ENGINE POWER REDUCTION WITH "CLUTCH DAMAGED"" FAULTS STORED This Service Information bulletin supersedes SI M12 06 15 dated July 2015. A drivetrain malfunction check control message is displayed, prompting the customer to contact the dealer for a service visit. F54, F55, F56, F57Target Integration level: F056-16-11-501 or higherThe vehicle drives normally, but fault(s) for a damaged clutch are stored in the DME. ? 1D3101 - Clutch: Damaged, transmittable torque too low ? 1D3201 - Clutch: Severely damaged, transmittable torque too low CAUSE 1. The DME software diagnostic for detecting excessive clutch slip is too sensitive. 2. The clutch is damaged."
M1202172018-11-05. Service bulletin. ?SERVICE ACTION: PROGRAM CONTROL UNITS (DME). Due to an error in the OBD diagnostics of the DME software, a marginal catalytic convertor or post catalyst oxygen sensor may not be detected as faulty.