# Service campaign 24\-01\-056G

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service campaign
- NHTSA id: 11006101
- Published by NHTSA: 2024\-08\-07
- Manufacturer's number: 24\-01\-056G
- Manufacturer's date: 2024\-07\-11
- Campaign id or software version: SERVICE CAMPAIGN T52G
- NHTSA component: FORWARD COLLISION AVOIDANCE: WARNINGS

## NHTSA's summary

Certain 2025MY GV80 \(JX1\) vehicles may exhibit the front radar warning light coming on at initial start\-up, and non\-operation of the Smart Cruise Control/Forward Collision Avoidance \(SCC/FCA\) systems, which are part of the Advanced Driver Assistance System \(ADAS\). Additionally, DTC C160404 \(ECU Hardware Error\) may set. Normal operation of these systems returns after restarting the vehicle. Follow the procedure in this bulletin to update the software for the Front Radar \(SCC\) system to resolve these symptoms.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2024/MC-11006101-0001.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2024/MC-11006101-9999.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance

## Trouble codes named

C1604

## Vehicles listed

- 2025 GENESIS GV80 Coupe

## Recalls for the same vehicles and component

- [24V584000](/recalls/nhtsa/24V584000.md), 2024-08-07: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

## Other bulletins for the same vehicles and component

- [26\-AD\-001G](/bulletins/11030323.md), 2026-03-30, Service bulletin: LANE DEPARTURE: WARNING; EXTERIOR LIGHTING; LANE DEPARTURE: ASSIST; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL; FORWARD COLLISION AVOIDANCE: WARNINGS. Some 2020MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto\-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance \(e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under\-inflation of the tires\). • Specific road conditions affecting the vehicle's balance \(e.g., excessive road crown\) This TSB provides instructions on how to service the vehicle when the front camera related warning light\(s\) are triggered due to system out of calibration \(DTC\_C272246\).
- [25\-GI\-007G TSB](/bulletins/11017343.md), 2025-04-30, Service bulletin: BACK OVER PREVENTION: WARNINGS. This bulletin provides a diagnostic and inspection procedure for addressing parking camera error conditions for G80 \(RG3\), GV70 \(JK1/JK1A\), and GV80 \(JX1\) vehicles. Follow the information in this TSB on the symptoms, causes, and associated diagnostic steps for camera issues based on the screen color and DTCs.

JSON: [/v1/bulletins/11006101](/v1/bulletins/11006101)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20campaign%2024-01-056G&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F11006101&vehicle=Service%20campaign%2024-01-056G)