Service bulletin ITB23-016A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 11005302 |
| Published by NHTSA | 2024-07-29 |
| Manufacturer's number | ITB23-016A |
| Manufacturer's date | 2024-06-07 |
| Campaign id or software version | PC967, PC981 |
| NHTSA component | SEATS |
NHTSA's summary
VOLUNTARY SAFETY RECALL CAMPAIGN 2022-2023 QX60; DRIVER’S SEAT RAIL INSPECTION INTRODUCTION Infiniti is conducting this voluntary safety recall campaign on certain specific model year 2022-2023 QX60 vehicles to inspect, and if necessary, replace the Driver’s Seat Rail. This service will be performed at no charge to the client for parts or labor. IDENTIFICATION NUMBER Infiniti has assigned identification numbers PC967 and PC981 to this campaign. The applicable number must appear on all communication and documentation of any nature dealing with this campaign. RETAILER RESPONSIBILITY It is the retailer’s responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) clients and vehicles in a retailer’s inventory. Federal law requires that new vehicles in retailer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Infiniti strongly encourages retailers to correct any used vehicles in their inventory before they are retailed.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Seats
| INFINITI QX60 | 2022, 2023 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 2023223 | 2023-04-14. Seats And Restraints |
|---|---|
| 23V268000 | 2023-04-13. SEATS:CRITICAL FASTENERS |
| 23V108000 | 2023-02-21. SEATS:MID/REAR ASSEMBLY |
| 22V111000 | 2022-02-24. SEATS:CRITICAL FASTENERS |
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| ITB23-016 | 2024-07-29. Service bulletin. REVISION 3 Please discard earlier versions of this bulletin. The announcement from June 8, 2023 has been revised to include the following: • The restriction on parts for this campaign will be removed and retailers will be able to order parts via normal process beginning July 30, 2024 • Parts on order in DBS will be fulfilled |
|---|---|
| ITB23-027 | 2023-12-08. Service bulletin. POWER FOLDING 3RD ROW SEAT SYSTEM CALIBRATION SERVICE INFORMATION Obstructions such as unfolded headrests or objects left in the vehicle may prevent the power folding 3rd row seat from returning to the upright position under power: • Verify that the 3rd row seat headrests are folded forward. o If the 3rd row seat headrests are not folded forward, the headrests can contact the 2nd row seats and prevent the power folding 3rd row seat from returning upright. • Verify that the floor between the 2nd and 3rd row seats is clear of any obstructions. o If there are obstructions on the floor, clear the obstructions and try to move the seat upright. • If the 3rd row seat headrests are folded forward and there are no obstructions, perform system calibration before attempting to replace any parts. o Refer to the ESM: BODY INTERIOR > SEAT > BASIC INSPECTION > SYSTEM CALIBRATION > Work Procedure If the power folding 3rd row seat does not return upright under power after performing system calibration, refer to the ESM for further diagnosis. |
| PC969 2022-23 QX | 2023-06-29. Service bulletin. EZ Flex Seat Owner’s Manual Supplement Voluntary Service Campaign ***** Campaign Summary ***** INFINITI is providing owners of approximately 21,278 2022-2023 INFINITI QX60 vehicles with a supplemental Owner’s Manual addendum. The 2022-2023 QX60 Owner’s Manual instructions for the 2nd row seat does not indicate that the one-touch seat release function may operate while driving the vehicle. Clients will be asked to place the supplement, which addresses the functionality of the one-touch seat release on the 2nd row seat while driving, inside the Owner’s Manual that came with their vehicle. ***** What Retailers Should Do ***** 1. Verify if vehicles are affected by this Voluntary Service Campaign using Service Comm or DBS National Service History – Open Campaign I.D. PC969 • New vehicles in retailer inventory can also be identified by using DBS (Sales-> Vehicle Inventory, and filter by Open Campaign). • Refer to IPSB 15-286 for additional information • SERVICE COMM will only be active for vehicles in retailer new vehicle inventory. 2. If a retailer receives a supplemental Owner’s Manual addendum for a vehicle they have retailed, currently have in their new vehicle or pre-owned inventory, or an INFINITI Courtesy Vehicle (ICV) Service, the retailer should either forward the owner’s manual supplement to the current owner or add the supplement addendum to the glove box of any affected vehicle they currently control. 3. Clients receiving this Owner’s Manual supplement have been advised to place it inside the Owner’s Manual that came with their vehicle. |
| 2022_2023-Infini | 2023-06-29. Service bulletin. OWNER’S MANUAL SUPPLEMENT The information contained within this supplement revises or adds to the “Precautions on Child Restraints” section of the “Safety-Seats, seat belts and supplemental restraint system” section in the 2022–23 INFINITI QX60 Owner’s Manual. |
| ITB22-023 | 2022-08-26. Service bulletin. KNOCK NOISE OVER BUMPS FROM SECOND ROW SEATS IF YOU CONFIRM A knocking and/or rattling noise is heard in one, or both, second row seat(s), when driving over uneven or rough road surfaces. ACTION Perform the SERVICE PROCEDURE, starting on page 2, to install two (2) plastic washers into each seat. NOTE: This procedure will be applied to both the incident seat, as well as the remaining second row seat. |